Honeywell 2361 , Inc. Pressuretrol Controller, Used with suspension type unit heaters.

PRESSURETROL WITH A .5-9 PSI RANGE

Pressuretrols are the standard in gas controls . They are used on heaters utilizing either a pilot or electronic ignition. The pressuretrol has multi-stage control that allows you to set for as many as four distinct stages of heating air temperature. Three color (red / green / yellow ) indicator bands visually show pilot and main burner status. The built-in high/low pressure switch limits pilot start up pressure to 2.5 psi and the main burner lockout prevents accidental burner operation below 1 psi system pressure. MODELS ARE ALSO AVAILABLE WITH A .5-15 PSI RANGE OR .

Your Honeywell Pressuretrol is a precision instrument that precisely maintains temperatures for the best operation of your gas unit heater. The temperature setpoint control with a .5-9 PSI range allows you to dial in and maintain the precise temperature at which you choose to operate your unit heater. The Pressuretrol digital display allows an easy view of the heat setting and current/desired pressure.

The Pressuretrol Controller, used with suspension type unit heaters, has a .5-9 psi range for use on most gas fired residential boilers. It comes standard with a zero adjust screw on the pressure port and is rated for pressures from 15 to 125 psi. A cover is included to protect the dial face.

A manual, pressure-reducing control suitable for use with most types of gas and oil burners. It may be installed in any floor, wall panel or ceiling. The dial face has a .5 to 9 psi range, 20 psi pressure differential (non-shock proof) and is perforated for mounting using 3/4 inch stainless steel sheet metal screws. The Pressuretrol has a build-in 24-hour clock, which may be set for ON-OFF cycling or steady operation between 1/2 hour and 12 hours.

The Honeywell 2296 (Pressuretrol) is used with heater models that have a suspension type design. Housing is made of steel for durability and has a convenient carrying handle. It has a 0.5 to 9 psi range with a 7/8 in. connection. The pressuretrol contains all of the necessary components, including the high limit safety switch, over-temp protection, and defrost control to name but a few, to operate these heaters safely and efficiently.

The 2361 pressuretrol is used with suspension type unit heaters to maintain a constant temperature in the room. In conjunction with the Honeywell 2700 Series, 7400 Series and 9300 Series of Liquid Propane heater models. 5/8" MPT connection to stove. For use with water pipe or flexible connector tubing. Ideal for new installations and conversion of existing direct vent steam heaters to natural gas or propane.

The 2361 is a Pressuretrol® Control that uses a pilot valve & gas control valve combination to control the output of your gas fired unit heater. Pressuretrol must be used with suspension type burner units.