ROBERTSHAW 1750-009 PILOT GAS S0LENOID VALVE

PILOT GAS S0LENOID VALVE

It is compatible with Lennox and other brands of gas logs and fireplaces

It provides a means of controlling the pilot flame during the winter heating season when the water heater is not in service

The Robertshaw 1750-009 Pilot Gas Solenoid Valve is designed for use on gas water heaters

Suitable for installations where hot gases and/or sparks will not be encountered at the valve location, in accordance with ANSI Z21

It is used to maintain pilot gas during periods when the main burner is not operating or when the furnace ignition is off

It features a durable, all brass body, which resists tarnishing and corrosion

A matching snap-in cover is also available

DESCRIPTION: The 1750-009 is a pilot gas solenoid valve used to control a gas appliance for pilot light or flame ignition

The Robertshaw 1750-009 Pilot Gas Solenoid Valve is used with hot water baseboard heaters

It can be used with a gas fireplace or gas log set to allow the pilot light to stay lit while the fireplace is in use

A pilot gas solenoid valve is used to operate the main burner of a forced-air furnace

The Robertshaw 1750-009 Pilot Gas Solenoid Valve is a replacement valve for older gas logs

Robertshaw Model 1750-009 is a pilot gas solenoid valve, which can be used with natural, propane or butane fuel sources

This valve is easy to install with no special tools required

The ROBERTSHAW 1750-009 PILOT GAS S0LENOID VALVE is perfect for residential and commercial applications

The NEMA 3R enclosure for this Robertshaw 1750-009 Pilot Gas Solenoid Valve makes it suitable for indoor applications and dry environments

DO NOT USE WITH OIL BURNER

The valve has a normally closed position that opens when the hot pilot flame is applied

This Robertshaw 1750-009 Pilot Gas Solenoid Valve has a Normally Closed (NC) Configuration and a 5/8 Inch NPT Connection

This product features manual pilot operation, a balanced poppet design, and adjustable spring tension

Features: Pilot Gas Solenoid Valve

See our complete line of Gas Valves

When the pilot flame is removed, the spring loaded poppet automatically closes the valve to prevent gas from escaping

The valve is designed for two wire, pilot operated, normally closed operation

For use with gas burner ONLY

ROBERTSHAW 1750-009 PILOT GAS S0LENOID VALVE

This valve has an O-ring seal, which provides a tight seal against leakage

A pilot solenoid valve allows the burner to be turned on or off by a remote source

It has a normally closed position and turns on when the gas supply pressure is present