A.O. Smith 98463 Copper-Fin2 Hot Surface Igniter
HOT SURFACE IGNITER WITH GASKETThe Hot Surface Igniter with Gasket is an ideal replacement for your old or worn out igniter with an easy installation. Unlike most igniters, after years of use, the...
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New AccountHOT SURFACE IGNITER WITH GASKET
The A.O. Smith HOT SURFACE IGNITER WITH GASKET is ideal when you need a quick replacement for your hot surface ignitor or gasket. Made with quality in mind, this hot surface ignitor ensures fast and effective heat distribution to equipment that uses gas and oil.
A.O. Smith PLT3400 is a 140,000 BTU HOT SURFACE IGNITER WITH GASKET commercial gas water heater that's ENERGY STAR rated. Perfect for restaurants and locations where excess showers and demand for warm water are available, the system operates at 10.5 amps @ 120/208 Volts to produce a maximum 38 GPM flow and 15 PSI pressure with an 1150 Watt integrated power supply in 29 gallons of 40°F water.
A.O. Smith PLT3400 PLT3400 HOT SURFACE IGNITER WITH GASKET
A.O. Smith PLT3400 PLT3400 HOT SURFACE IGNITER WITH GASKET The AO Smith PLT3400 igniter is a Gas Hot surface ignitor for gas wall furnace applications. This device is electrically operated and used for the ignition of gas or gas/air mixture under controlled atmospheres up to 2,000 degrees Fahrenheit. For proper installation, you will also need to purchase the AO Smith Gas Valve GSK-PLT-1GASKET-5V from our website.
A.O. Smith's PLT3400 Hot Surface Igniter with Gasket is designed to work with most gas control valves. It has a 3/32" diameter stud and current setting of 30mA at 24 volts DC, center mount configuration, an amp rating of 0.062 amps at 120VAC at 60Hz and a temperature rating from 140F-600F . This part has a hinged stud cover and is UL listed for use with BBQ Grill burner systems.
This hot surface igniter is an electrically controlled switch used to ignite the gas flame on natural gas or propane gas appliances that require a continuous pilot.
These igniters are designed to Ignite gas appliances that vent their products into the atmosphere. Plunger Type gas valve igniters are designed for manually operated gas valves and pilot assemblies of various gas appliances, such as glass melting furnaces, pizza heaters and furnace pilot lights.