Probe (RTD), Flange Moun t 1906002 GARLAND

Probe (RTD), Flange Moun t

Probe (RTD), Flange Moun t 1906002 GARLAND

Probe (RTD), Flange Mount 1906002 is used to connect thermocouples to devices.

The Probe (RTD), Flange Mount Model 1906002 is a 0 to 400 Degrees F range thermocouple probe constructed of fluorocarbon and is intended for use with many types of RTD temperature indicating equipment, including meters and recorders.

Probe (RTD), Flange Mount

The Garland Series Probe (RTD) Flange Mounter is a low-cost, manually operated probe assem bly designed for use with the GARLAND series of data loggers. The ro tary position encoder has four major components: a magnetized wheel, a read/write head, a spindle that attaches to the data logger, and a cable assembly. A st nut can be positioned in the center or any one of eight other detent positions on the wheel. The read/write head reads these null positions during the initial alignment process and can also be used for coarse adjustm ent under computer

The Flange Mounted Probe (RTD) is a type-K, dual-range device with two probes shielded in a stainless steel tube. The larger of the copper sheathed cables, protected by nylon braid and rubber jacket, is 70" in length with a test temperature range of -196° to 752° Fahrenheit (-125° to 400° Celsius). The smaller of the two cables is 54" in length with a test temperature range of -64° to 392° Fahrenheit (-54° to 200° Celsius).

The Flange Mount Probe (RTD) can be mounted to the Flange Mount bracket, or to any concentric pipe where a 2 inch outside diameter x 1.58 inch inside diameter mounting flange is required. The probe itself is inserted directly into the piping system and measures temperature in the range of -60 to 360 degrees F (-51 to 180 degrees C).