Probe & Switch Assembly Kit (Low Water Protectio 00-289121 HOBART

Probe & Switch Assembly Kit (Low Water Protectio

Product Description: HOBART 304008588 Probe & Switch Assembly Kit (Low Water Protection) (9) - Kit includes (6) Switch and (3) Probe units with red - and green-end plugs. These can be used in combination or one for a sensor watch.

HOBART's probe and switch assembly kit contains all the components except controls for a low water protection system. Kit will serve for any Hobart model where switches and probes must be replaced.

With the use of this low water protection probe and switch assembly kit, you can eliminate false alarms caused by low water. The assembly kit comes with a 20 foot probe that will attach to your disposer's power cord, and a 3-port switch that attaches to the probe. This kit has a 10 amp capacity and is for use with Hobart disposers (model numbers must begin with 00F).

The Probe & Switch Assembly Kit protects the probe from high water temperatures. This kit also includes a new glow-in-the-dark on/off switch.

When your Hobart FF250/300/350, FF-100/120, FF-150, TGA250/300, TGA-150/230, TGM250/300 and TGM-200 Series models are equipped with the probe & switch assembly kit, a thermal fuse will safely protect your equipment in the event that water freezes in the inlet water. Tested to 716°F (380°C) @ 0.5A and 1A trip levels.

The Probe & Switch Assembly Kit includes: (1) Probe and (1) Switch assembly.

This kit includes the switch and probe assembly and a 6-foot pigtail. The switch is a normally closed type and will open if it detects that the probe has failed. This assembly can be used with all Hobart low water level products and replaces part numbers 00-298500, 00-289501, and 00-289201