Honeywell RM7897A1002 , Inc. Enhanced Auto Primary W/ Prog Post-Purge

PROG AMP PROVING SEQUENCE

To insure proper operation of the product, BASIC AUTO PROG must be performed at the end of power-up. If Performance Verification (PV) option is not installed, PROG AMP PROVING SEQUENCE should be performed after the test above to verify proper operation.

The Honeywell RMR7897A1002 899MHz Enhanced Auto-Check with Prog Post-Purge monitor combines the sensitivity of a standard remote monitor with the added feature of a PROG AMP PROVING SEQUENCE to verify accuracy at the time of installation. Displaying vibration, zone status, outdoor temperature and user settable prog alarm points.

Prog amp proving sequence follows. This is an opening message to ensure that the system has proofed properly and is ready for use. After this message, the system will enter into prog amp verification.

Set the primary with post purge cycle. The inverse sequence is also acceptable (prog amp prov then perp).

The RM series process meter contains the following components: a rugged, segmented magnetic pickup; a robust housing assembly; a complete internal electronics assembly; and individual Prog Amp prove-out software. The RM family also offers two housings in sizes 4" through 14": Flange Mount and Snap Mount.

Sequence of functions conducted for a particular test. This sequence may include: set knob, plug in, press ramp switch. In other cases, it may include initial heating and purging of the unit. The sequence for major tests is listed in the overview description.