RESIDEO
Resideo VCZZ7100 3WayLinearValveCartridge
The Resideo VCZZ7100 3WayLinearValveCartridge is a replacement valve cartridge for the Resideo VCZZ7000 3WayLinearValvePrinter. This cartridge prints high-quality 3D prints with accurate and...
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New AccountGAS PILOT ASSM W/IGN.ELECTRODE
Flame Rectifier Gas Pilot Assembly with Ignitor Electrode. 0.028 in orifice diameter. "T" port style.
The 0.028 in orifice diameter Flame Rectifier Gas Pilot (P/N: 2373)is a gaseous pilot device that does not feed gas to the gas-fired appliance. Instead, it requires the flame from an igniter electrode to pass through the gas stream that it produces. The GRIEFPROD series of igniter electrodes have been specifically designed for use with the Flame Rectifier Gas Pilot (P/N:2373).
For Gas, Propane, or Natural Gas HONEYWELL GAS PILOT MODELS #GSP114G-T & GSP114G-T/H ## Requires Arc Suppressor #AP5265 (not supplied)
Flame rectifier pilot assemblies have a generalized application where flame-ignition is used to obtain a desired gas flow rate. They are usually applied in relatively low pressure, single-stage gas supply systems and their direct flame control action overcomes the effects of pressure fluctuations resulting from changes in gas demand.
Flame Rectifier Gas Pilot, 0.028 in orifice diameter, "T" port style ***************************** ****** ******** ** ** ************* Flame Rectifier Gas Pilot, 0.028 in. Orifice Dia., 0.848 in. Length, 0.547 in. Maximum Dia., "T" Port Style, Natural Gas or Propane ***************************** ****** ******** ** ** *********
The 2290 series is a popular line of thermocouple regenerative gas pilots used to supply pilot flame for all types of gas flame rectifiers up to 1200 C. A guard type heater/ignitor system is used to maintain consistent, constant temperature in the thermocouple element which reduce electrode wear and damage from arc-over. The thermocouple sheaths can be removed externally to facilitate insertion or replacement in the furnace. HONEYWELL OPEN FLAME PILOTS ARE DESIGNED
Flame Rectifier Pilot, Type GA39-11, 0.028 inch orifice, Inlet Connection: T-Port (Male), Outlet Connection: Large Female Pipe Thread (NPT) Open Pilot Type, Pilot Provides Ignition Power to the Unit.