Honeywell 6364 , Inc. Flame Rectifier Gas Pilot 0025in orifice dia 45 degree left-hand burner tip

GAS PILOT ASSEMBLY WITH A 0.025" DI

Honeywell 6364 - Division Pilot Assembly has the following superior features: Pilot Assembly with a 0.025" DI orifice dia and a 45 degree left-hand burner tip. O-Ring (1 each). 2 Pins. 3 Studs with nuts. 1 Wire clip for studs (1 each). Wire clip for connecting to manifold assembly (2 each).

The Honeywell 6364 is a flame rectifier gas pilot assembly with an orifice diameter of 0.025" and a left-hand burner tip. Features include one flame rectifier assembly, one refractory block, one 90° elbow fitting, one burner tip and a temperature rating up to 1000°F.

The 6364 flame rectifier gas pilot provides the same features and function as the 6360265. Instead of using the burner tip to supply ignition for the gas pilot, this design uses a separate flame rectifier assembly mounted directly opposite and adjacent to the gas control valve inlet orifice. With a 0.025" diameter pilot orifice, the 6364 flame rectifier gas pilot is recommended for use where automatic shutoff is required. The 6364 flame rectifier gas pilot can be used with

0025IN ORIFICE DIAMETER, 45 DEGREE LEFT-HAND BURNER TIP, AND SCREW AND SCREW HOLDER ASSEMBLIES FOR USE IN HONEYWELL FLAME RECTIFIER GAS PILOT ASSEMBLY 6364.

The 6364 Flame Rectifier Pilot Assembly operates in the flame rectifier portion of either the 0015 or 0020 pilot assembly and is meant to work with either the 6362 or 6363 nozzles. The Flame Rectifier Assembly has a 45-degree angle of incidence to the pilot cavity, a 0.025"-inch diameter flame orifice and a right-hand burner tip

Honeywell CGA-2606 Series Pilot Assembly used on Weber 0026 Gas Grill 0026 01011500 `0` Thermocouple Grommet with Nylon Washer and Nut to Connect Thermocouple Assembly to Adjustment Nut. Ideal for S1153 and S1182 112312K

Honeywell was the first to introduce the gas pilot assembly for gas-fired ovens and ranges in the early 1960's. Over the years, our engineers have continually improved on the original design, resulting in today's easy-to-install, complete gas pilot assembly. It has a safety air shutter, is used with either natural or propane gas, and is constructed of stainless steel. The flame rectifier (not included) forms a jet-shaped flue that is simple to install and produces