Honeywell 2498 , Inc. Q7130 Q7230 Q7330 Q7630 Interface Modules for S

INTERFACE MODULE W/ADJUSTABLE NULL

This is an Interface Module W/Adjustable Null. It is needed for some interfaces and is sold separately. This product will have different model numbers depending on the application. The description below is intended only for Q7130, but may also be the same for other models of the Q7100 series. I

Honeywell 2498 Interface Modules for S ?? ??* Adjustable NULL (tone) capability with any or all of the following detectors: Micro-Pulse, Linear Micro-Pulse, Optic, Mini-VOC and Firebrick. ?? ??* Multiple EOL Output options (includes ASCII) ?? ??* 4 general purpose relays ?? * Local or remote configuration of detector output assignments, data format and test mode for individual interface modules

The Honeywell Q7130, Q7230, Q7330, and Q7630 Interface Modules with Adjustable Null are designed for use with the S series Proximity Locks. Available in 110 VAC or 24 VDC versions that can be factory configured to any of eight standard time multiple choice 0 to 30 VDC time ranges (0-19 hours). The 24 VDC version has built-in anti-bounce circuitry. A battery version is available that operates from two

4 INTERFACE MODULES IN A DUAL MID-PLANE CONFIGURATION (2 PER BAY) **. ?? Features: * Quality Sealed with No Internal Wiring * 1 Low Voltage Input * 2 DIP Switch Configurable Outputs (Each interface can be programmed independently) * 2 Internal Fan Outputs - 3 Terminal Locking Buzzer Output - Half Of Push Button/LED s For PCA Programmable System

The Honeywell 2498 Interface modules are a family of devices that allow for the connection to multi-party HVAC equipment in order to monitor and trend data or send control commands. This family includes the Q7130 4-channel interface, Q7230 8-channel interface, Q7330 12-channel interface and the Q7630 16-channel interface. The modules come with either an adjustable relay null or an adjustable 4-20mA output depending on the model.

The Honeywell Q7130 Interface Module provides sensors/outputs that are compatible with existing Honeywell devices and other manufacturers’ devices. The Q7130 is a fully customizable interface module for use in a wide range of applications, from simple to complex multi-zone requirements.

The Q-7130, Q-7230, Q-7330, and Q-7630 are 10/100BaseT interfaces that provide modem control for the SENSYM family of devices. All four modules contain a built in Null modem that is selectable via software . The basic function of the interface module is to convert the RS-232 or RS-485 device signals into Ethernet protocol signals for transmission via a wired LAN.