AMANA 169357 -Amana R0156743 INDUCER FOR 90%

ID BLOWER ASSY#

The duct blower assembly produces a continuous flow of air for the defrost cycle. It starts when temperature is sensed, to keep the internal evaporator coil free of frost and ice build-up.

The Inducer is a blower component of the compressor. It draws in and compresses refrigerant gas to operate the air conditioner's cycle.

This Inducer Assembly is a genuine replacement part for select Amana and Maytag Gas and Electric Dryers. If you are unsure whether this is the correct Home Dryer part for your model, please contact us for assistance.

This blower inducer can be found inside a gas furnace that runs on gas.

This Inducer is designed and manufactured for Amana Refrigerator Models: AFS-1CFA, AFS-2CFA, AJC-5CFA, ALA-5CFA, AML-5CFA, AMQ-5FPA, AMQ-5LPB, ANS-7LPA, ANS-8LPA, APD.

Amana brand R0171969 Inducer motor for use in the following models: XL02D13A; XL06F12A; MCF033; and MCF101 w/Serial

This Inducer Assembly is used to limit the inlet pressure, therefore regulating the flow of refrigerant in a refrigeration system. It is used on 90% systems with a discharge set at 500 microns or less. It is a single-stage manifold mounted behind the evaporator, and made of aluminum.