Honeywell 115760 R8222U1079 24V GENERAL PURPOSE RELAY DPST 24V GENERAL PURPOSE RELAY DPST

DPST GENERAL PURPOSE RELAY (12A)

Need to turn a lamp on and off? This miniature relay is the answer. This DPST general purpose relay (12A) has two switching positions: coil for 24V DC load and NC/NO contact for 24V AC/DC load. The low-cost solution for all your switching needs!

The General Purpose Relay has a contact rating of 12 Amps. The contact rating is for Commutator and Coil. The contacts are rated for continuous Current, AC or DC. The contacts are normally closed (NC) by default however they also provide NO and NC contacts on the terminals.

HONEYWELL Part R8222U1079 is a 24 volt DPDT general purpose relay. The DPST style, with 3 terminals, will operate with a 20 mA current at 12 volts DC input voltage. It has a rated contact resistance of 10 milliohms at 12 volts AC/DC. With no coil voltage, the high current contacts have a contact resistance of less than 1 milliohms when closed. It has a 10 K ohm pull in current and is operational over 0°C to + 60°C temperature range. This relay is for use with any application that will control

The Honeywell R8222U1079 is a 12VDC General Purpose Relay with normally open or normally closed contacts. This single pole double throw DPST solid state relay features screw terminals. The internal coil resistance is 3 ohms, the intrinsic safety rating is SCR and the basic life expectancy is 10,000 actuations at maximum load. This product has been tested and found to comply with UL Standard 507.

The R8222U is a general purpose relay that is inhibited when AC voltage is applied to the C-E terminals. The contacts are normally open and close when a low level signal is applied to E. It is available in screw or terminal-mounting styles, as well as DPDT (double pole, double throw) and DPST (double pole, single throw).

Honeywell General Purpose Relays are designed for use by equipment manufacturers, industrial control system integrators and end users to convert a low voltage signal to a higher voltage signal across load contacts that are electrically open or normally closed.

Honeywell General Purpose Relays are for use where a single control system may be used to control 2 or more devices which require separate, non-overlapping circuits.