HONEYWELL R8225D1003 R8225D1003 SPUD MOUNT FAN RELAY(DPST,2N/O,MAIN

SPUD MOUNT FAN RELAY(DPST,2N/O,MAIN

HONEYWELL R8225D1003 R8225D1003 SPUD MOUNT FAN RELAY(DPST,2N/O,MAIN

This SPUD MOUNT FAN relay has 2 NO (normally open) contacts. It is used to control light or moderate loads. The SPDT relay is the most common variety and will handle 1/4 hp loads.

The R8225D1003 is a spud-mount, DPST (Double Pole, Single Throw) relay with two normally open contacts and maximum voltage of 115 Volts AC. The contacts are rated at 10 Amp resistive.

The R8225D is a low voltage SPUD Mount Relay. The relay is  single pole dual throw (SPDT) with a reversing lever and a DPST (double pole, single throw) common (C) contact. It is Tungsten / Redraw with a 0-240VAC / 10 Amp maximum switching capacity.

The R8225D1003 fan control from Honeywell is a simple DPDT (double-pole double-throw) relay that can be used to switch AC power on/off. This relay has two NO (normally open) AC contacts and is intended for use with a 12V DC supply. This relay comes with a 5.5 m lead for direct connection to the controller PCB. Applications include mounting the relay into an electrical box in place of a FAN in air circulation systems. It also includes a cover and screws and if using it as a SPUD MOUNT assembly, you'll need to

The R8225A Relay is a single pole, single throw normally closed (NC) relay that has been designed for use in SPUD Mount installations. The sealed construction and small size of this product help protect the sensing circuit from unwanted intrusion of water or dust.

This relay is designed for use on a Honeywell/SCB SPUD system. This relay is a direct replacement for the Honeywell/SCB part number R8225D1003.