Honeywell 2656 , Inc. Control Center, SPDT, 120 VAC

FAN CENTER 120V PRIMARY W/SPDT RELA

FAN CENTER 120V PRIMARY W/SPDT RELAYS # SPDT (3) 120V RC

A General Purpose fan control center designed for ceiling or wall applications with 6 sealed metal toggle switches includes:-Fan Center 120V Primary w/SPDTRela-Fan Control Center 120V Primary w/SPDTNC-Fan Control Center 277V Primary w/SPDTNC

The Honeywell 2200H2150 Model Century II Control Center is a four-wire fan center with primary 120V switches for the resistance heating in air conditioning systems. SPDT relay has a 15-Amp rating, 10 second resettable circuit breaker and 690-voltage actuator. Requires optional transformer.

The FAN CENTER Control combines the function of a four-wire SPDT Relay with a straight blade terminal strip. The SPDT relay provides the ability to control fan and lighting loads which can be applied from either line or load side. The 2656-1 is ideal for control of lighting, appliance grounding transformer and switching 120 volts AC.

The Honeywell 2656 control center is a combination Secondary/Relay contact center. The SPDT Relay contacts are sensed by the Primary FAN contact on one side and by an Auxiliary relay contact on the other. The SPDT Relay contacts are normally open until set to the closed position. When energized, it will direct 33% of the incoming voltage of 120 VAC to the input side of the primary contactor coil (K1) and 66% to the input side of the auxiliary relay K2. The Auxiliary relay has two SPDT Relays that are generally used to control other units such

The DSS2F24D is a fan center. It is ideal for residential applications in dry locations not subject to moisture or corrosive environments. The DSS2F24D features a slide type SPDT (single pole double throw) switch with red-green indicators, 0-15A current rating, and 120 VAC voltage rating. The pole dimension doubles at 20A.

The Fan Center combines the three traditionally separate components of a fan, light and projector controller into one control center. This makes setup and operation faster and allows you to switch your head end control by simply changing the lamp assembly. The Fan Center is UL listed for up to 1000 watt lamps or 300 watt metal halide lamps, and comes with built-in relays for 3 stage instant changeover for 250-5000w, dimming, and 3-speed fans.