Honeywell 2680 , Inc. Electric Heating Relay 24 Vac SPST

ELECTRIC HEAT RELAY SPST,240V

This heat relay is designed for use with electric resistance heaters and it has a connection screw terminal. It features a Snap-On connector for easy replacement and the SPDT (Single-Pole, Dual-Throw) switch. The relay has a C terminal, which is used to power the heating device when another circuit switch is pressed to turn on the heating device. This relay is designed for use with 240V systems and has a maximum voltage of 250VAC at 10A contact rating.

The Honeywell 2680 heating relay is a SPST, 240V relay intended for use in single phase solid state electronic load control circuits. Relay contacts are rated for 1A @ 250VAC and 0.5A @ 24Vdc. Features ?? Form C contacts ?? Spade terminals remain open or closed ?? Contact resistance of 21 mOhms max. ?? Contact material Tin-plated copper alloy ?? Ambient operating temperatures 0C to 60C

Converts 24vac to 24vdc for your heating application. SPST (single pole, single throw). Heating Relay, DPDT (double pole, double throw), 240 volt. Use with Honeywell part number 2694. ``

The HEATING RELAY, 24-VAC, SPST is a single contact powercontrol relay in glass passivated chip carrier and operates on 120 VAC, 230 VAC voltage ranges. It requires no heat sink and has rated current of 3.0 amps and power 6.0 watts.

The Honeywell 2680 single-stage electric heat relay is a solid-state contactor that controls electric heating devices through AC line voltage. It has a constant-on SPST non-latching coil. Four terminals are provided for the heating device. The 2680 is UL listed and CSA certified, making it suitable for use with humidifiers, blowers, space heaters, panel heaters and other applications.

The Honeywell 2680 Electric Heating Relay has a 24 Vac SPST (Single Pole Single Throw) configuration and normally opens contacts. Operating temperature range is -55 to 125 °C (-67 to 257 °F). Industry standard 5/8 inch round mounting hole.

The 2680 is a 24 VAC SPST heating relay designed for use with electric-water heaters and heat pumps. The integral thermal overload protector (TO35) delivers reliable protection against equipment damage.- Contacts: 4 SPDT - Max Current AT 250 VAC, 8 A - Max Current AT 1250 VAC, 20 A Wiring Diagram