MCDONNELL & MILLER RB-122-E RB-122-E ( RB-122 ) 120V PROBE TYPE LOW WATE

( RB-122 ) 120V PROBE TYPE LOW WATE

Low Wate Probe Protector for the RB-122 and RB-121 Detects water in the fuel tank. 120V Probe Type Low Wate.

The M&M RB-120-E ( RB-120 ) 120V Probe Type Low Water Alarm ( RB-120 ) 120V Probe Type Low Water Alarm combines electronic detection with local audible and visual alarms to provide clear and dependable indications that a water leak has occurred. The combination probe type/freeze type alarm monitors for water and freeze damage as well as other intrusive soil gases. A self contained power unit permits mounting of the sensor above floor level. Sensor selection allows use in

This is a 120V Probe Type Low Water Flow Rate Zone Sensor. It has a flow rate of less than 1 GPH **(RB-122)**Detector • Low flow • 120 volts • 11 gpm max flow rate with 0.25 psi sensing

The RB-122 is a 120V, 1/2" NPT probe type low water switch for use in boiler systems. It can be used to switch on heating circuits or gas valves so that heated water can be delivered to the radiators in a building. Great when used with our 1/2" NPT drain traps!

Deep Fryer RB-122-E 120V Probe Type Low Water. With its heavy gauge stainless steel construction, this reliable deep fryer will outlast most other brands. The RB-122-E has a 120 volt heating element with automatic safety shut off and an integrated stuffing box to keep the oil clean. A front mounted thermostat switch regulates cooking temperature between 300° and 375° F. A magnetic drive pump system circulates hot cooking oil for even frying. Includes a one gallon (.

Probe Type Low Water Shutoff Circuit Breaker (RB-122) is portable, requires no extra devices for sensing and monitoring water level in steam condensate, boiler feedwater and heat transfer cooling water systems. It can be installed either as a replacement of existing circuit breaker unit or direct field mounting on the electrical connector.

The mid-range RB-122 is a compact, multireflector probe type water level gauge. The unit is equipped with an adjustable low water cutout and a 4” (100mm) standard spindle. The sleeve bearing provides smooth operation. The RB-122 was designed to be one of the most economical probes on the market while providing a quality gauge for the homeowner or weekend warrior .