OTC OTC302019 Receiving Adapter

RECEIVING ADAPTER

It can be used with an OTC Turbo Discharge Valve, or an OTC pressure relief valve, or any other brand of discharge valves with a similar configuration

The Adapter Plate is designed for use with the current ISO standard test heads on the market

The OTC23355 Adapter Plate allows the operator to clamp an OTC23340, OTC23360 or an older OTC23020 and 23021 test head to the Adapter Plate

This certificate shows that the part has been tested for compliance against SAE International's test methods in accordance with the requirements of Federal Motor Vehicle Safety Standard # J1008

This is an OTC ADAPTER PLATE to connect a 1/2 inch FNPT or BSPT or NPT inlet connection to a 3/4 inch FNPT outlet connection

The OTC OTC23355 ADAPTER PLATE for the OTC 3-1/2 in

Angle Drill will allow the drill to be used with Bosch® 12V max, 18V and 36V lithium-ion batteries

The OTC23355 is also compatible with Line 6's Nx wireless receiver and the H2n Handy Recorder

Adapter Plate for ISN Web OTC23355

This adapter plate allows the use of the OTC 23355 with non-OTC masks

This adapter plate allows you to attach a microphone with a standard 5/8-27 thread to any 3/8" stand

The ISN OTC adapter plate is a simple and cost effective way to enable your existing high pressure washer to operate at lower pressures in the 5,000 psi range

The adapter plate has three ports: 1) Inlet Port - 1/2" FNPT - Stainless Steel; 2) Outlet Port – 3/4" FNPT – Stainless Steel; and 3) Discharge Port – 3/4" FNPT - Stainless Steel

The Adapter Plate is made of Titanium and comes with a Certificate of Conformity issued by SAE

This is an adapter plate for the OTC 23355 Portable O2 Unit

OTC OTC23355 ADAPTER PLATE

OTC OTC23355 ADAPTER PLATE: The OTC 23355 Adapter Plate allows the use of an 1-1/2” ID x 5” OD x 12? long, double socket, hex bolt adapter to measure and set a through bolt

It allows you to clean faster and more efficiently