Johnson Controls 107816 RELAY, 4PDT 120V

RELAY, 4PDT 120V

This product is a "Johnson Controls 107816 RELAY, 4PDT 120V". It has been rated as a 3.5 out of 5 star product. The price is $1.

The Johnson Controls 107816 Relay, 4PDT 120V is an SPDT (Single Pole Double Throw) relay with normally open and normally closed contacts.

Johnson Controls 107816 RELAY, 4PDT 120V is a 120VAC coil and contact device designed for use in commercial and industrial control applications. The relay has four normally open (N.O.) contacts rated at 25A at 240VAC, 8A at 120VAC and 20A at 30VDC.

This product is a 4PDT 120V relay. It has a panel mount and screw terminals. The current rating is 0.2A at 120VAC, 0.1A at 24VDC, 1A at 125VDC. There are three coils: coil 1 and 2 are normally closed, coil 3 is normally open. This device can handle 600VDC at 500mA when used with an appropriate fuse and diode combination that protects the device from damage beyond its rated specifications.

This relay is used to switch power on and off in a circuit.

The Johnson Controls 107816 is a standard 24VDC/120VAC time delay relay designed to switch inductive loads. The relay can be mounted on a PC board or in a panel. The maximum load power is 5 Watts at 120VAC and 20 Watts at 24VDC.

The Johnson Controls 107816 Relay is a 4PDT, 120V relay with a Through Hole mounting. This means that it has four connections for wires, as well as a metal can and metal base to protect the internal components. It is rated for 300VAC at 15A, and comes with a 1 year warranty from Johnson Controls.

JCI is the premier global provider of building efficiency and security solutions that enable its customers to reduce their total resource consumption and improve their quality of life through energy efficiency, safety and security. JCI’s comprehensive building systems expertise is available to customers through in-depth technical support and a broad choice of integrated systems, as well as a global network of local service centers.

The relay is a small electrical switch. When no voltage (or a low voltage) is applied to the coil, the switch is off. A change of state of the relay is achieved by turning on or off an external circuit. When that happens, the circuit connected to the common terminal of the relay will be activated or de-activated.

The Johnson Controls 107816 RELAY, 4PDT 120V is a solid state snap action relay designed for use in electrical control circuits. The SPDT contacts are rated for 100mA and 24VDC at full load.