RHEEM 7250P-644 Combustion Blwr Adapter Plate -Ruud

Combustion Blwr Adapter Plate

The Combustion Blwr adapter plate is used in place of the intake manifold when a RHEEM or RUUD blower install is required. The plate locates the blower to the cabinet and provides the mounting provisions required for the blower power pcb, motor starter, and wiring.

Rheem 7250P-644 Combustion Blwr Adapter Plate - Ruud

This Combustion Blwr Adapter Plate is designed for use with Ruud equipment. The Adapter Plate allows a conduit or straight connector to be installed between the combustion blower and the furnace installation in order to make electrical connections easier and safer.

Rheem 2 & 3 Wire Combustion Blwr Adapter Plate - Ruúd

The Ruud 7250P-644 Combustion Blwr Adapter Plate is designed specifically for the Rheem RUD425 and RUD440 Gas Furnaces. This combustion blower adapter plate allows the furnace to operate properly during a heat-only mode when an air handler or evaporator coil is not connected, preventing blown fuses and malfunctioning of the blower.

The Ruud Rheem 7250P-644 combustion blwr adapter plate replaces the OEM pilot assembly that came with your unit. It is complete and includes all of the parts necessary including the Pilot thermocouple, thermocouple support bracket, pilot safety valve, spring valve, retaining clip, O-Ring gasket and filter screen.

The 7250P-644 combustion blower adapter plate allows you to convert from Rheem's standard split terminal connection to a Y-type connection for use with gas heaters and certain gas water heaters.