RHEEM 70-24206-01 -Ruud 120V Induced Draft Blwr W/Gskt

120V Induced Draft Blwr W/Gskt

This RHEEM/Ruud 70-24206-01 Induced Draft Blwr W/Gskt contains a burner assembly manufactured by AGA of Italy. These burners incorporate a built-in igniter and are the preferred style of gas fireplace manufactures when they build their own to assure trouble free operation and perfect performance. This brand new burner assembly is delivered ready for installation. It is rated to equivalant with the original manufacturer's AGA #1012380.

Purity, performance, and reliability go hand-in-hand with Rheem's Induced Draft Blr. The patented design creates a downdraft through a unique combination of fan position, draft inducer motor, and furnace ducting system. No other brand offers the level of dependability that Rheem downdrafts provide. This led heat only blwr is designed to provide up to 30% annual energy savings compared to competitive ld units. All blwr models may qualify for utility rebates program checks additional details in flue liner kit manual

The RHEEM Model 70-24206-01 is a 120V induced draft blower, wall mounted complete with grille and gasket.

For Induced Draft Blowers: The RHEEM / Ruud Model 70-24206-01 is suitable for commercial and residential applications. You will see the "T" connectors in the center of this blower on your existing inducer motor as well as the control board. This inducer is capable of handling up to a 4 ton system and has a 130 CFM speed.

Rheem has designed the RPB-BQ series induced draft blower with a built in pressure switch for your convenience. The RPB-BQ's premium efficiency motor is 100% duty cycle rated, which means that it can work at a lower RPM and at higher heat, while still maintaining appropriate airflow rates. And, you have the option of installing this blower on either a 56mm or 62mm collar outlet for even more versatility.

This Ruud induced draft blower is designed for gas-fired condensing boilers found in residential and light commercial applications. Comes complete with a gasket to properly seal the furnace to the duct system and capillary tube, helping to prevent air leaks

When your system is out of balance, the low pressure switch will turn on and off until it is. This type of switch should be used on systems with an induced draft blower. The pressure switch should be located in the return air duct close to the blower.