RHEEM SP20832B Gas Control (Thermostat) - NG

"4""WC NAT GAS VALVE"

The gas valve is designed with an adjustable gas control to handle medium to high gas pressure. It has a rated capacity of 80 to 250,000 Btus. This gas control is made of steel with a natural finish and can be used with cast iron burners. The 4""WC NAT GAS VALVE measures 5-13/16""W x 6-1/4""H x 4-23/32""D overall.

The RHEEM 8""® Gas Valve is a factory installed control for use with natural gas. This field-proven design provides a compact and reliable solution for installation into virtually any heating system including hydronic, radiant, or fan convector systems. The valve offers a mechanical limiter to ensure longer life operation and greater safety than electronic throttling devices. Using a single outlet port the valve can be used for both residential and commercial boiler application up to 100,000 Btuh at 5 psig pressure differential.

The RHEEM 208B Series Gas Valve is used for the control of natural gas or liquid propane gas in heating and cooling equipment. This valve has a 2-Pole, 4-Wire configuration and is designed to control either proportional or on/off gas flow. The 208B Series valve allows the operating rate to be adjusted by converting the time the solenoid is energized to regulate the flow of gas. This model 20832B is a straight-through, small orifice, normally closed thermostatic gas control valve for single stage, normally open dual temperature installations. Note: It will not fit G

The Rheem SP20832BN-Gas Control (Thermostat) is single stage gas valve control designed for natural gas applications. This Rheem Gas-Valve has continuous pilot and a safety shut off. Minimal maintenance is required to this Rheem Gas Valve. Solid brass spade terminals on the pilot.

This is a genuine replacement valve for a Rheem NG (natural gas) furnace. This part is sometimes referred to as a thermostat or gas control valve.

Rheem Gas Control Module NG-SP20832B Continuous 24/7 Solar charged gas valve kit (standard model). This Rheem OSS-2 is used in a good working condition."

The SP208-32B is a safety gas control valve with built-in thermowells that provide additional protection to the appliance or system against improper installation and unsafe conditions. Inspectable for proper operation, includes gasket and Teflon tape.