RIB RELAYS 56679 SPDT ENCLOSED PILOT RELAY 10 AMP SP

SPDT ENCLOSED PILOT RELAY 10 AMP SP

The RIB RELAYS 56679 SPDT ENCLOSED PILOT RELAY 10 AMP SP is a double-pole, single throw (SPDT) Pilot Relay in an epoxy-filled, weather resistant sealed case. They are designed for use in electrical control circuits.

RIB RELAYS SPDT ENCLOSED PILOT RELAY 56679 – Heavy duty pilot relay designed for heavy-duty coils. Solid state control from 5 to 250 volts. pilot output control from 0 to 10 amps, Wiring screw terminals.

Enclosed pilot relay SPDT. Sealed unit unbreakable polycarbonate case. SPDT lever switch used to operate pilot lamp 25 amp maximum, connect load terminals with one side of standard incandescent lamp or indicator have 6 ohm resistance at power line frequency. For use with FANMOUNT power pack P/N 20098A (No Longer Available) and many other types of load .079 inch mounting studs on top and bottom in 2-1/8 inch X 1/4 inch hole centers.

The RIB SPDT Enclosed Pilot Relay has a wide range of applications and is suited for most pilot valve switching, with an integral current overload protector.

Enclosed pilot relay with 5/8" x 18 threaded bushing. Green molded plastic case, silver oxide gel cell and silver contacts. Conforms to NEMA 1-2013 specifications. 10 amp SPDT. Operating voltage 30-250 VAC@50/60Hz; coil resistance 2.5 Ohms@120 VAC, 3 Ohms@240 VAC

These pilot relays (SPDT enclosed) feature a sealed, molded polycarbonate housing that is strong enough for constant use and abuse in harsh environments. The SPDT PILOT relay is designed to switch a high power load when a variable dc voltage is applied to the control line. The SPDT pilot relay can be mounted to almost any PCB or DIN-rail without special tools or hardware.

The SPDT Pilot Relay is used to control on/off operation of an external device from a source of 50VDC up to 30VDC.