Honeywell 35308 120V RELAY MODULE WITHOUT DISPLAY

120V RELAY MODULE WITHOUT DISPLAY;

120V Relay Module Without Display ; 120V DC Input (with fuse protection); 12V AC/DC Output; Connectors: Screw Terminal; Dimensions: 3.50" x 1.75" x 0.65"; 30 Amps A @ 4-20 mA - 250 Watts

120V Relay Module; without Display;

The Honeywell 35308 120V RELAY MODULE WITHOUT DISPLAY is a solid-state, high current (10A) relay module (inserts 2-pole normally closed type contacts into application circuits). It contains both active and common terminals for connection to normally open or normally closed application circuits. The coil is rated at 120VAC with 15mA nominal operating current, an operating voltage of 6VDC, and has internal overload protection. This relay is intended for use on 120VAC/60Hz applications.

The 35308 is a 120V relay module with a relay output of 120VAC/5 VA, and has 115 Vac power consumption. It converts two modes of control into single phase AC contact closure that can be used for start/stop, run/stop, and limit control.

The 35308 120V Relay Module is a solid-state electronic device that switches 240VAC to an external load. This module presents two different power requirements of 24VDC and 120VDC to the Zwave Alliance as a single entity. The 35308 provides the user with a turn-on delay current of up to 800mSec and time delay of 0-100Sec.

This relay board module, 35308 is 120V AC/DC self-resetting solid state relays with a 3-year warranty.

The 35308 is a 24VAC, 10A relay module with screwdriver terminal connections. This relay module is designed for use with Series 5000 microprocessor controls to control devices requiring higher-power switching up to 10 amps at 120VAC. (3) Screwdriver Terminals