RADON VAC SIDE WALL RADON MITIGATIO
The RADON VAC® Side Wall Mitigation system is designed to reduce radon in the area of potential concern for homes with forced-air HVAC systems. The system has been independently tested by the EPA, approved as effective and classified as an “Unrestricted” product. Free from restrictions, you can be assured that it will protect your health and home like .
The RMS160 by RADONVAC™ is designed to evaluate side wall radon mitigation. The RMS160 draws air from outside the structure, passively or actively reduces radon concentrations, and then discharges the reduced air into the structure through a hole in the wall.
This fan is part of the RMS160 Radon Mitigation System, a complete solution for both new construction and existing homes including the R10 passive radon system, four Bluecadet active radon sump pump and RASP high performance in-line fan. The Radon Vac Side Wall Fan is designed to be installed in a home's wall, ceiling or floor as part of the within soil suction radon mitigation system. The 1.6 CFM 120v Light Duty
Product Description RMS160 Radon Vac Side Wall is a low pressure fan booster which is designed to evacuate the radon gas in building below the sink, floor drain or other sump installations. RMS160 allows the vacuum generator and filter to be mounted under the side wall of a building foundation where required.
Open your door to the world of radon mitigation with the sleek RMS160 Vacuum Side Wall. This unit is built to fit tight spaces, and packed with features such as the durable cyclone suction system and convenient side tables for placing treatment elements. Welcome to the Cyclone family.
The RADON BOOSTER SYSTEM RMS 160 is designed to vacuum radon from the floor, dissolve it in water, and discharge the resulting solution through a side wall. It will also minimize concentrations of radon in the mixed air, keep it from reaching dangerous levels in your home. The system provides added protection to homes with higher radon levels or basements where radon gas tends to concentrate. Brackets that are adjustable on both sides of the vaness help compensate for any irregularities in the
With the TRM/RMS160, you can start your mitigation project immediately, without having to turn your house upside down to install a pipe. The side-wall radon mitigation system is inserted into an existing basement wall and does not require any modification to your home. The TRM/RMS160 provides a continuous seal around a service and drains into a plastic bag or container. Top of the line components include a floating filter, dial gauge, and yellow scrubber material.
Free Shipping
In stock
