ADAPTER TO TEST THERMOCOUPLES
This adapter is used in conjunction with the Thermoelectric Module (Catalog No
They can be used in HVAC or hydronic heating and cooling systems
The Robertshaw 10-038 Adapter is designed to test thermocouples
The Robertshaw product number is 10-038
They work by converting a temperature difference into a proportional voltage
The adapter permits the thermocouple to be tested by connecting it to a source of voltage, and then measures the resistance between its terminals
This product is a standard length 10-038 Robertshaw brand Thermocouple Adapter for testing thermocouples
CONNECTS THERMOCOUPLES TO MEASURING DEVICES
- Model: 10-038
The -338 Thermocouple Adapter allows the user to test thermocouples in an easily accessible location
ADAPTER TO TEST THERMOCOUPLES
Thermocouples are used almost everywhere in industry to control temperature or measure it
The MetroPac R-S series thermostats are the most flexible and economical programmable residential thermostats available on the market today
10-037) to test thermocouples
The voltage is measured by an instrument that converts it into a digital output
This adapter is used for testing thermocouples in the field or researching thermocouple design and applications
The adapter has a stainless steel construction, and it is compatible with the Robertshaw 20000 and 20000A Hygrometers, as well as Robertshaw DHT27 Hygrometer/Thermometers
This is the Robertshaw product 10-038 ADAPTER TO TEST THERMOCOUPLES
The measurement is used to determine if the thermocouple is within range and has not been damaged during use
This part is a Robertshaw Thermocouple Adapter, 10/32 X 27/64
It measures from a range of -55 to 250 degrees Fahrenheit
Used with a temperature controller this adapter allows you to test thermocouples by connecting between the heater or cooling device and the thermocouple wire
The thermocouple characterizing curve shown below shows the relationship between the measured output voltage and the measured temperature for three different thermocouple types (iron-constantan, nickel-chromium, and copper-constantan)
The adapter is made of Type K thermocouple wire, which has a temperature coefficient of 100 ppm/?C