1/2" X 1/2" SLOW OPENING HSI GAS VALVE 7200DER-SO-
It features color coded terminals and a white plastic case
It is easy to use and has a stylish design
The Robertshaw ETC-111000-000 Line Voltage Thermostat, 120 to 240VAC, ETL/cETL Certified has a maximum voltage rating of 240VAC at 50/60 Hz and a minimum voltage rating of 120VAC at 50/60 Hz
The Robertshaw ETC-111000-000 is a line voltage thermostat that can either be used as a replacement or in new applications
When there is no equipment connected to the auxiliary contacts, and the space temperature falls below the set point, an audible alarm will sound and hold until reset
As a leading manufacturer of commercial and industrial temperature controls, the RANCO ETC line is recognized as the industry’s leading encapsulation thermostat
The Robertshaw ETC-111000-000 Line Voltage Thermostat, 120 to 240VAC is a high quality product and made to be long lasting
This unit has a built-in auxiliary temperature sensor to sense the ambient temperature of the space
The ETC-111000-000 is a 8-wire, line voltage thermostat that is programmable to create a variety of on/off cycles
Our customer service team members are standing by to answer any questions you may have about this thermostat or any other Robertshaw products
It ranges from 55 degrees F to 110F with a maximum load of 10 amps and minimum field voltage of 24 volts DC
The Robertshaw ETC-111000-000 Line Voltage Thermostat, 120 to 240VAC includes a manual and instructions on how to set it up
This thermostat features an easy to use dial system and includes temperature settings from 32°F to 100°F
This product is UL listed to ANSI/UL Standard 2034 and CSA Certified
This thermostat has the ability to control temperature and activate two stage heating and two stage cooling for your comfort
The unit is not recommended for use with direct-drive gas furnaces, domestic water heaters, etc
This Robertshaw Commercial Electric Thermostat is a perfect fit for your commercial application
The RANCO ETC-111000-000 3 Pole Line Voltage Thermostat, 120 to 240VAC, 277/480VAC is used to control a device such as air conditioner, fan or heater
This thermostat is designed for use with air conditioning, heat pumps and water heating equipment
It has an external adjustment screw and comes with the mounting hardware needed
If you need an ETC-111000-000 Line Voltage Thermostat, 120 to 240VAC, call us for fast and friendly service
The NO terminals are ideal for dual temperature sensors such as water jacketed boilers
The best in class design, construction, and performance set a new standard for precision temperature control and are certified by ETL to meet UL, CSA and CE standards
This product will save energy and money while increasing comfort and reducing stress on your system
What better way to save energy cost than by using this thermostat!
This thermostat features a common terminal block with two normally open (NO) thermocouple call points and two normally closed (NC) contacts that can be matched to three wires, or four wires and one common wire
This thermostat is designed for monitoring and controlling line voltage heating appliances such as electric baseboard heaters, fan-forced heaters, or steam-type radiators
Control Supply is a leading supplier of Robertshaw brand products
This particular thermostat is an easy way to help control the temperature in a building
Use this thermostat in commercial and residential applications
Free Shipping
In stock
