Robertshaw 705-452 "120V OPERATOR

"120V OPERATOR

Robertshaw 705-452 "120V OPERATOR

Designed for installation into the low voltage mounting box of any Robertshaw or Accu-Swim spa control panel. The 705-452 "120V OPERATOR will help provide a new look and feel to your hot tub. An IR control panel is only required if you are wanting to use the 705-452 with an existing IR remote (not included).

The 705-452 120V OPERATOR will work on heating and water/glycol temperature control demands from a variety of sources. Its operator box is constructed of 18 gauge galvanized sheet metal and features four mounting bolt holes for easy installation.  It can be used with AG-AIR-8-G thermostats or any other thermostat that has 3/8" terminal screws, up to a maximum of 250 watts RMS (500 watts peak).

The 120-V Operator is pre-wired to permit the operator to be plugged into an existing 120-VAC source and includes a mounting base. The 120-V Operator can be used for applications such as space heating, grain drying, exhaust fans, water circulation pumps, etc.

The new Operator double handle complete set is an ideal control for portable or built-in tank heaters and water heaters installed to the 120V nominal power supply. It contains two valves with a common spool design that allows independent control of hot and cold water with a temperature limit stop protection to each valve.

The Operator is a 120V Time-Delay electric water heater that has a 3/4 in psi hot water outlet and 1 gallon cold water inlet. The 25,000 watt elements heat up to 120 gallons per hour, and can be set for delayed start up to 6 hours.

The Robertshaw 705-452 120V Operator with pilot light is a high quality main burner control valve that fits perfectly into the Robertshaw 055-3755, 055-3745 and 072545. This thermal type manual thermal main burner control is used on steam table cabinets, popcorn cookers, water heaters and other applications with a thermostat controlling the water temperature. It controls the fuel gas supplied to the #10 orifice main burner.