MCDONNELL & MILLER 4191 REMOTE SENSOR (1 LEVEL) 179524 REMOTE SENSOR (1 LEVEL) 179524

REMOTE SENSOR (1 LEVEL) 179524

4191 REMOTE SENSOR (1 LEVEL) 179524

Remote Sensor (1 Level) 179524

Bringing the best of computerization to today's professional, industrial designer or hobbyist, the 4191 Remote Sensor (1 Level) gives you unparalleled control of your laser cutting system. This easy-to-use and upgradeable interface panel has a RS-232 communication port for connecting to a computer or over the network, and gives you full control over all laser and engine functions. It sits conveniently on a benchtop or the optional pedestal base for easier viewing, and its USB connector is parallel compatible with most PC serial ports for upgrading to the latest versions of our software.

The 4191 Remote Sensor is a high quality reusable remote sensor (1 level) with timing. The 4191 is for use with the Select series gas, oil, or electric boilers and the UltraFi remote control system. When used to replace a failed or malfunctioning remote sensor, it provides reliable performance and saves money on unnecessary service calls.

The Remote Sensor allows the operator to control the level of heat that is igniting the burn pot on a central command station. Newer traditional remote sensors are connected to low voltage (24 Volt DC) wiring and require an outside power source to operate. The 4191 Remote Sensor operates at a nominal 24 volts at minute current draw of approximately 80mA nominal. This eliminates the need for outside power and wiring. Many times, these remote sensors are used in cold climate applications where there is an extreme difference in temperature between the floor load area in which they are mounted and the ground line voltage that is 200-240 volts AC, 60

Keep your machine in perfect working condition with our remote sensors. Each sensor has a temperature range of +5 to 135°F (-15 to 57°C), and includes a 4-foot cable with 4-pin connector.

The remote sensor is designed for ¾" to 1-1/4" walls and incorporates a 17" flexible probe. The sensor can be positioned for use from the floor or while mounted. This sensor can be used with the following models: 4191, 4192, 4193, 6191, and 6192