S1-02435778000 SWITCH,PRES,AIR,0.60 IWC ON FALL,SPNO

SWITCH,PRES,AIR,0.60 IWC ON FALL,SPNO

SWITCH,PRES,AIR,0.60 IWC ON FALL,SPNO

This is a NEW IN BOX S1-02435778000 SWITCH,PRES,AIR,0.60 IWC ON FALL,SPNO

The S1-02435778000 SWITCH,PRES,AIR,0.60 IWC ON FALL,SPNO is a small particle switch that will sense the particles .60 microns or larger. It is made of stainless steel construction. It is used with the HEPA filter in an air scrubber.

A switch, pres, air, 0.60 iwc on fall, spno

Switch,Pressure,Air,0.60 Inlet,SPNO

When engaged, this spring-loaded switch places 24 VDC at 0.60 A on the center contact. The air pressure is on the common terminal on the normally open side of the switch. When the actuator is held in the fall position, the switch disconnects power from all sections of cab signal control except car 7687625, car 7693752, car 7693775-4, and car 7890978-0...

The Switch Preset Air Pressure Switch is used to provide Pilot Air pressure to the landing gear system. This pressure switch has two positions. "On" maintains the set pressure within the switch. "Off" removes power from the pressure control valve solenoid allowing the landing gear to extend provided that there is no other failure in the system.