York 144374 Coleman L145-30 Limit Switch Klixon Mount Auto Reset 145F with 30F Differential (Source 1 # )

SWITCH,LIMIT,145/115(O/C),AUTO RESET

**SWITCH,LIMIT,145/115(O/C),AUTO RESET**

The Coleman Limit Switch features 3 wires, and a 60 ft. long lead for easy installation. It comes with mounting hardware and has an automatic reset. The switch is rated 145F on, 115F off, and the differential is 30F. This is a 2 Pole 1 Throw limit switch and is used to sense temperature in heating and cooling systems, machinery or control circuits

The Coleman Limit-Switch protects your electrical equipment from overload and short circuiting. This model also includes an Auto Reset feature, which allows you to restart the load after a reset is initiated. The switch is an all metal design with adjustable set points for 145 F and 115C .

The Limit Switch,Mounted,Klixon Trigger is a single-pole,N.C., auto reset, limit switch. It is used to sense the point in the travel of equipment at which load actuation is required. It can be mounted with screws and the enclosed mount clips or with rivets. If mounting with rivets it will require a 0.052 diameter hole in the workpiece for passage of the wire/pigtail wires. The unit should be grounded to prevent accidental

The Coleman Limit Switch 145-30 is an OEM replacement switch for many model vehicles. It can be used in place of limit switches with part numbers: SPDL3G31, LCT5305, LCT7651, LCT7851, A987-0817, 49629630 and others with a 145/115 offset and 30 F differential. It has a rating of 145 Amp/200 Amp and a voltage of 12VAC/24VDC

The Klixon® Limit Switch is a non push to reset, automatic resetoverload protection device for use on inductive loads. Rated for voltage up to 600 VAC and current up to 145 A at 115 VAC, 144374 can be used with wiring systems complying with IEC 60204-1, CSA C22.2 No. 30, ANSI/NFPA 70B-2005 (Class A and B Circuit Breakers) and NEMA MG1-2004 (Type B

2 Position, L145/115 Speeds Below 45 F TO12F . 25kAIC XLT KLIXON MOUNT