YORK S1-02537421460 HEATER,CRANKCASE,480-1-60 HEATER,CRANKCASE,480-1-60

"Belt 480v 70W 21.8-29""Dia 6""Ld"

"Belt 480v 70W 21.8-29""Dia 6""Ld" is a good product.

-Serial Number: YS1-02537421460

YORK S1-02537421460 HEATER,CRANKCASE,480-1-60

Throw this item in your cart if your residential oil-fired boiler is causing you to lose heat! This belt is compatible with the York brand of oil-fired boilers, helping you to get back to normal operation.

A belt-drive heat pump dryer that can determine the drying time to meet your desired performance. The slim, stylish design fits where other models don't.

The YORK S1-02537421460 HEATER,CRANKCASE,480-1-60 is a handy replacement for your furnace. The belt runs along the engine of most furnaces and heaters to transfer motor power into mechanical motion. This item is usually spotted in the lower right hand corner of your furnace or on top of your gas or oil powered heater.

If you operate or maintain this equipment, refer to the Operator's Safety & Service Guide (OS&SG) for important safety information.

The YORK S1-02537421460 HEATER,CRANKCASE,480-1-60 is designed for use with electric motors to help control the temperature within the crankcase. This manual type primary heater comes in a steel casing with removable end caps. The spring actuated disc thermostat permits quick starting and full load operation. The core is made of specially selected nickel chromium alloy for high diathermic efficiency. Full copper windings are wound on alumina formers for low core losses in the heating stage, and an aluminum oxide varnish over insulating baked in enamel finish in

The York brand has been around the block, to the track, back to the block, etc., etc... So, when you put your name on something, it had better be something worth putting your name on.

The York 2 Phase Air Heater is a three-wire single phase 480 volt gas fired, tank-type forced convection heater. The heater element is designed for use in superheated or reheat applications. The heater element is constructed of corrosion resistant materials, with "C" clamps for easy installation and grounding to the electrical supply box.

The YORK CRANKCASE GENERATOR is a Professional Grade, 480 volt single-phase unit for heating, ventilating and air conditioning applications. It is remarkably quiet, compact, requires low wattage per horsepower, and can be mounted indoors or outdoors.

The York S1-02537421460 Heater,Crankcase,480-1-60 is sleek and compact with three different ducts that can be tilted in one direction or another. It features top and bottom forced air hoods that are easy to remove for full cleaning of the filter. This product also features transient over voltage protection. It has both an on-off switch and a power light indicator to provide safety while protecting it from unintended use. This product heats up quickly in any residential or commercial setting.