YORK S1-0263402 S1-0263402 SWITCH,LIMIT, 180/150(O/C) 2702-338

SWITCH,LIMIT, 180/150(O/C) 2702-338

The SWITCH,LIMIT, 180/150(O/C) 2702-338 of YORK is designed for use with a LIMIT,UNDERWATER 360 degree rotation cover. This is a 90 degree position switch for underwater application to select a drying cycle by turning the knob clockwise. It is used with the AF series of dryers. The SWITCH,LIMIT, 180/150(O/C) 2702-338 has solid shaft with 8mm dia. and 14mm length, BSPT body sealing connection with flat washer and nylok nut

The YORK S1-0263402 S1-0263402 SWITCH,LIMIT, 180/150(O/C) 2702-338 010 is a switch-limiting device designed to limit the flow of an energy source under certain operating conditions. This product is suitable for use on natural gas infrared burners and controls the ignition mode of the burner.

The S1-0263402 Switch,Limit, 180/150(O/C) 2702-338 from YOR

The S1-0263402 is designed to limit the operating speed of the electric motor and connected Fan. The switch is arranged for mounting in a convenient position near the fan controls (fig. 2). The switch is rated (A) 200V, 50Hz, 3Ø; trip rating, 0.16A at 10K P E; RPM:180/150(O/C) 2702-249

Concentric multipole switches are designed for control of electric motors and other voltages applications. They feature clear indication of on/off state with bright LEDs. The rotaries are factory set to permit manually controlled shut down in emergency situations. All models are suitable for indoor or outdoor use and the switch actuating element, contacts area and levers are sealed against moisture, oil, dust etc. With a continuously variable limit range of 180° to 150% of rated current.(50Hz / 230V).

Limit switch in good cosmetic condition. Approximate size: 2 1/4" long x 3/4" wide x 1/2" thick. The entire set of limit switches is located inside the machine, mounted on the wall adjacent to the door. The green wires are soldered to the terminals at each switch location and can simply be unsoldered, then removed. The terminals are spring loaded and will move out on their own when the switches are unplugged.

Proven, high-reliability toggle switch in a compact design. It can be used for both single and three-phase applications. The B1 terminal is a spring-loaded connector that allows for easy installation in permanently mounted panels.