S1-02808828700 SHEAVE,VARIABLE 2 GRV,1.375" BORE,2VP60

SHEAVE,VARIABLE 2 GRV,1.375" BORE,2VP60

Sheave, variable 2 grv, 1.375" bore, 2vp60

This 2VP60 series variable speed motor sheave is matched to a 5063-16C6B1804 motor. This yoke sheave has lower efficiency than a straight sheave and should be used only where effectiveness of operation or appearance is not critical. It has a 1.375" bore with a 1 1/8" diameter pivot bolt hole. This sheave comes with a set screw to prevent movement on a shaft and a flange for mounting purposes.

Variable-speed sheave with 2 grooves; 2.875- in. (72 mm) width; 28.5- in. (724 mm) diameter; 1/2 in.-14 UNC thread; 1.375 in. (34 mm) bore; steel construction; zinc plated

The SPACER, TURNING 2 TSR is a machined gear spacer. The type of spacer depends on the application. It's used with pumps, blowers, freewheels, etc., and needs to turn freely. The OD is always turned toward the power source.

+VARIABLE SPEED HYDRAULIC MOTORS

This sheave is used in conjunction with an HDPE (high-density polyethylene) rope.

QTY