York 150156 DRAFT INDUCER VENT BLOWER WITH MOTO

DRAFT INDUCER VENT BLOWER WITH MOTO

The Draft Inducer Vent Blower with Moto is a powerful blower that has a 0.5 amp motor and 1 amp circuit breaker that ensures that it can run for long periods of time. It also has a thermoplastic polymer casing that withstand the elements. The Draft Inducer Vent Blower with Moto produces 2000 CFM, enabling it to blow many common commercial grade products. It also comes with an extension cord of 30 feet in length.

The draft inducer/vent blower with moto uses the power of air to transfer air directly to the burner. It's projected-type metal nozzle has a 15 degree angle, which helps direct the air forward toward the burner and reduce any possible back-draft. This draft inducer/vent blower with moto is installed in a vented wall opening and requires an existing or new wall duct for duct connection.

The York Draft Inducer Vent Blower with Motor provides 15,000 CFM (cubic feet per minute) of volume flow. This vent inducer’s high-capacity motor operates at lower speeds to move maximum air volume while emitting low noise levels. The motor can also be reversed for use on exhaust applications.

The Draft Inducer Vent Blower is an easy and cost-effective way to increase air circulation in any home. This draft inducer vent blower has a 50' power cord. Includes metal cover and exhaust boot that will fit over existing or new HVAC ducts.

The Draft Inducer Vents blower provides positive pressure ventilation with 100% rated operational performance and zero backdraft for optimum indoor air quality. Energy-efficient 2-phase motors provide superior performance and ease of maintenance. Motor and blower pumps can be operated separately, which is ideal for loud environments like garages and machine rooms. Vibrant 15-micron stainless steel mesh filter suspends contaminants to protect motor from passing particles.

The Draft Inducer Vent Blower is a high quality, energy efficient, direct drive, induction motor with a thermostatically controlled built-in thermal overload. The high quality motor features a ball bearing mounting system, thermally protected draft inducer and heavy-duty thermoplastic housing. This blower has been tested to meet all industry standards for performance and safety.

Constructed of a corrosion-resistant galvanized steel housing with a baked enamel finish. The draft inducer vent blower is equipped with a two-speed motor, thermostatically controlled indoor manual switch, and an all-weather motor cover