YORK S1-2845-3181 LIMIT SWITCH LIMIT SWITCH

"Limit Switch

Our YORK Limit Switch features a rugged zinc die cast housing, 1/4" shaft mount, 5-32 screw mounting and a maximum voltage of 250VAC. It has a 1/2" NPT lock nut and a 28/38 spline for 1/4" shaft.

The YORK ML series limit switch is used to operate machines and equipment automatically. The ML8807-311 Limit Switch features a compact design for easy installation.

Limit Switches are used to stop motion of machine parts by activating an output device or function. Generally, limit switches are wired to machine power circuitry so that they are activated when the machine stops moving. There are many styles of limit switch with different built-in functions and applications.

The York Limit Switch is the ideal replacement for any application utilizing a 24 volt, snap action contact rated at 10 amp with 1/4" spade terminals. This limit switch has an adjustable stop to prevent damage to machinery or injury to operators.

Limit switch for HVACR and refrigeration equipment under protective housings. This limit switch is designed for use where a high degree of moisture protection is required. This switch has a heavy-duty spring mechanism, a steel face seal gasket, and a weep hole in the housing to allow condensation to escape. It is suitable for direct drive applications.

A limit switch is a circuit-controlling device that is activated by a mechanical, non-electrical action. In many cases, a limit switch will be activated by the approaching or movement of a mechanical part. For example, a switch might be installed in a conveyor belt to prevent the belt from moving material forward if the load becomes too heavy.

The YORK S1-2845-3181 limit switch works in conjunction with the pressure sensor to shut off the equipment when the fill level approaches the desired amount. The limit switches are designed to work inside of confined spaces, while still being accessible for easy maintenance.