York 150806 S1-331-02968-000 Communicating AH Control Board

KIT,COMMUNICATING AH CONTROL BOARD

The S1-331-02968-000 Communicating AH Control Board is designed to replace the communicating control board within the following product models.(Please always refer to the "Identifying Parts" drawings located in the back of the manual, prior to disassembly)

The Communicating AH Control Board is designed for use with York brand HVAC systems listed in the compatibility table.

The York Communicating A/H Control Board is designed to replace existing boards with ease. This new A/H control board is compatible with the existing Communicating Technology which is available on 2-wire or 4-wire communicating systems. The AR531W A/H control board is designed for use on heat pump systems only. The A/H control board is for use with fully modulating heat pumps and has 24V bridge output, without over-temp. For use with the 40LX230;41LX230;42LX230;43LX230;44LX240;45L

This communicating BACB control board can be used on all of the York brand of air conditioning systems using the AH series of controls. The S1-331-02968-000 has a design that has the ability to be connected to the host RBC control board by having an RS485 communication connector. This allows for both boards to call for cooling at desired set points, send error messages, and verify that applicable limit switches are tripped properly. The control can also be connected remotely to allow you to troubleshoot misbehaving parts of the system without actually having to open up doors or floors.

The York Communicating Receiver is a Z-Wave wired, in-wall control board designed to be mounted within a wall. It can also be used in a z-wave wireless setup when paired with a compatible GCX, Gateway. This model can be set up for one or two stage heat/cool operation. Wall mounting hardware and instructions are included.

The control board (part number 150806) is used with under counter single-compartment, factory-built refrigerators. The control board replaces the existing board to provide electronic communication between the refrigerator and the system controller or microprocessor.

The York Name is synonymous with quality and reliability and this replacement board for the S1 model is no exception.

Installation instructions in English, French and Spanish in PDF format are in the file section in the support tab.

This is a preowned item. This item may or may not be in original packaging. Item ships with all necessary attachments. A one year warranty through the manufacturer is included with this item.

The Bi-Color, Single Pole Fashion Light by York is an easy to assemble wall sconce. This sconce requires no electrical wiring, has no on/off switch and fits flush to the wall with two screws. The lights are pre-wired with a plug to connect to a 16 or 18 gauge speaker wire.

Built-In Process Monitor Diagnostics with Open Loop and Proportional Integral Derivative (PID) Control

Shock, Seismic, Photovoltaic System for Low Voltage Lighting Applications in Residential & Commercial Construction