YORK S1-7710-3281 FAN & LIMIT SWITCH FAN & LIMIT SWITCH

95-130F AUTO Limit Switch

This 95 to 130F temperature control switch is designed for use with electric fan units. It is best suited switching AC-operating / heating units that require temperature control; compressor units, system overload trimming units, water heaters, boilers and air conditioners that can be matched to the switch for temperature control.

York Heatcraft S1-7710-3281 Limit Switch, Fan & Limit Switch

York S1-7710-3281 FAN & LIMIT SWITCH, 3/4 H.P. 240 Volt - Shaded Pole Motor, Fan Cover --- 0.156 Amps, 1/2 Inch x 7/8 Inch Limiting Switch, 5-Inch Capacitor Contactor Compatible with PSC Motors

York S1-7710-3281 Fan & Limit Switch is an original replacement part.

YORK S1-7710-3281 FAN & LIMIT SWITCH is a 2 pole 2 position, 120 VAC SPST POSITION, FAN MOUNTING INSTALLATION. The switch has a Normally-Closed (NC), Normally-Open (NO) contact configuration. Switch mounts onto a 11.5 mm D shaft and is rated at 0.91 amps , 0.045 hp @ 125 VAC and has a maximum operating temperature of 85 degrees Celsius with a minimum operating temperature of -40 degrees Celsius

The York S1-7710-3281 Electronic Control Limit Switch allows a single stage fan to be controlled up to a 3.2 hp motor. This product is ideal for ventilation, exhaust fans and light fans.

The YORK S1 series is a solidly built, totally programmable controller for HVAC systems. The YORK S1 gives the installer the ability to easily configure heating, cooling, and spa/pool control, as well as humidification and de-humidification.