ICM Controls 128003 Temporary Construction Thermostat, Cool Only, 45 Degree

2-WIRE Cool Only TEMPORARY THERMOST

ICM 2-Wire Cool Only Thermostat - Fully featured with an all metal case, easy to use and install. Dual temperature settings have been factory set to deliver an ideal 45°F and 65°F operating temperature range, making it ideal for temporary heating needs.

ICM Controls TEMPORARY THERMOSTAT, COLD ONLY, 45 DEGREE, WITHOUT HEAT SENSOR 128003

The ICM Controls 122-8003 Cool Only Thermostat is a temporary thermostat designed for use with heating and cooling equipment in both permanent and temporary applications. This 0-100F thermostat features an adjustable 45 degree swing and a 12 foot lead wire that can be extended at the terminal block with the included connector. A translucent white dial makes adjusting the temperature easy, and it requires a C/W connection. This Thermostat records temperatures within 0.5F (+/-0.5F accuracy) to help maintain consistent temperatures in your home or business.

A compact 2-wire thermostat offers the ability to control two stages of heating and cooling to help maximize building comfort. The large numbers make this unit easy to read in any light.

The ICM Controls 128003 45 Degree Temporary Thermostat is a two-wire, enclosed, magnetic thermostat with locking and non-locking switch options. It features push-in terminal retention and 20 amp maximum contacts. For short duration heating applications (less than 8 hours), this 45 degree temperature control can be used to space heat or cool equipment on a construction site, light industrial area or other operations that require temporary temperature control.

For temporary applications where the power or air conditioned utility service is not available Status indicators are built into the thermostat. The "Heat" and "Cool" status LEDs indicate line power is present. The STATUS LED will light green once the thermostat receives line power and initialize. When the device is programmed, one of the "Heat" or "Cool" status LEDs will flash at a rate of once per second to signify that the thermostat control output signal is active. When neither heat nor cool are requested by an external temperature sensing device, both status LEDs may be solid.

Temporary construction wall mount thermostat with a large red dial can be used for temporary installation of central air conditioning systems in uncovered ductwork of existing buildings.