SCANSTRUT922-PTMR11 TAPERED RADAR MAST

TAPERED RADAR MAST

SCANSTRUT922-PTMR11 TAPERED RADAR MAST replaces old style circular radar masts which must be changed for every safety radar. This 80' long mast has 3 sections, each section is 4' long, comprised of fiberglass and carbon fiber material. Each section will add a 4' length to the overall length and should be secured with a stainless steel mounting clamp (STS-8) or fastened with copper wire for a permanent installation.

Climb to new heights with the SCANSTRUT922-PTMR11 TAPERED RADAR MAST. This Radar Mast is designed for use as a building component in radio towers with an outside diameter of 16" - 44", an operating temperature of -55 Celsius to +55 Celsius, UIAA falls rating of F9/J2, and MSS SP-75.

SCANSTRUT 9-22-PTMR 11 TAPERED RADAR MAST antenna. US Coastal Guard approved. Great for your vessel or boat.

The SCANSTRUT922-PTMR11 is a TAPERED RADAR MAST that is used for the AN/SPS-64 and associated antennas. The 922-PTMR11 is constructed of high strength forged aluminum and has a diameter of 23 1/4" OD. The mast is utilized for spiral cable used in the AN/SPS-64 system.

This is a lightweight tapered radar mast for use on the Defender 90 and 110 models.

This 9" pultruded radar mast is reinforced at all nodes for high wind stability. It can also be easily cut down to the height you need.

For easier handling, the radar mast is made from 922-PTMR11 aluminum alloy. The appropriate thickness and alloy design provide torsional rigidity and minimize the weight of the radar mast. The roller bearing support provides easy adjustability and able to support the blades.

Whether upright, lowered, or horizontal, the SCANSTRUT922-PTMR11 is a highly versatile antenna mast for AIS, radio and radar applications.

Stainless steel 2 inch radar mount with changeover aerials. Locking nuts and bolts supplied. Two pieces assemble per drawing.