SCANSTRUT922-SC102 SCANSTRUT MT RADAR POLE

SCANSTRUT MT RADAR POLE

The SCANSTRUT MT RADAR POLE, 922-SC102 is an interconnecting mast section designed to replace worn out or malfunctioning sections of a standard MIL-SPEC antenna mount assembly. Simply assemble this kit where the mast sections are required and install the included fasteners.

The SCANSTRUT MT [RADAR POLE] is an easy to use, hands-free motion tracking device that can be mounted almost anywhere for portable video or photo shoots. Use the built-in magnet on top of the MT [RADAR POLE] to clip it onto a car roof, camera crane or any other flat ferrous metallic surface. It will then track movements of any ferrous metallic objects that pass below it to create interesting visual effects.

The award-winning SCANSTRUT MT RADAR pole is the only rigid pole currently on the market that provides true, exclusive protection from mis-rotation due to vehicle rear end collisions. Fits nearly all current generation vehicles and is available in heights from 15' to 55'.

With the SCANSTRUT MT Radar Pole, complete with 922-SC102, you are able to extend your radar's utility from marine pierside applications to river and docking operations. The pole can be deployed for 360-degree movement providing a continuous, non-blocking safety zone around pier pilings, boat mooring balls and marinas. With a variety of connection options for 3 Watts or 7 Watts, this pole gives tailfins flexibility within the same telescoping pole.

The Scanstrut MT Radar Pole is perfect for whenever you need to mount your switch unit high above the ground.

The Scanstrut MT radar pole is manufactured from aluminium and is the ideal mounting solution for a complete radar installation. This two piece MT radar pole features a telescopic design for easy installation with a large range of movement allowing you to position your radar antenna in the best possible place for coverage and accuracy. The pole also includes an internal vibration isolator to prevent damage to your investment.

This pole can be used for Radar applications where long standard or telescopic poles are required. The MT radar pole is 10" longer than the standard pole and utilizes the same low vibration pump, electronics mount and antenna mount as the standard SCANSTRUT pole.  The only difference is that the MT has a weight of 7.5 lbs and extend of 25 ft 1 in.