SCHNEIDER ELECTRIC AV-92 (Barber Colman) "CAM & PLUNGER

"CAM & PLUNGER

The barber COLMAN MACHINES have been designed to work with different kinds of products, from the most common ones in the market to the most sophisticated ones

The Schneider Electric AV-92 "Barber Colman" (Cam & Plunger) is a primary, 2-way, 100% mechanical valve designed for use on gravity feed, low service factor systems

Can be used with any wire rope from 1/8" through 5/8" (3-16 mm) in diameter

The Schneider Electric AV-92 (Barber Colman) is a cam and plunger pump that is suitable for pumping water, air, or other liquids

The AV-92 (Barber Colman) Cam & Plunger is a specially designed actuator that directly controls the Barber-Colman series 92 Automatic Air Valves

This product can be found at many suppliers across the nation, but we offer it at our store for a more reasonable price than what you would find at other vendors

The AV 92 (Barber Colman) "CAM & PLUNGER by SCHNEIDER ELECTRIC can be used in various applications such as household, commercial and industrial

It is designed for use with all V-Type pump chains using shaft sizes up to 5/8"

A quick and easy way to connect, disconnect, and reconnect an A/C condenser

Schneider Electric AV-92 (Barber Colman) "CAM & PLUNGER allows easy replacement of worn or damaged factory parts

When properly adjusted, there should be no need to remove the actuator from the valve

It is one of the products from a leading manufacturing company called Schneider Electric

The AV-92 (Barber Colman) can be used to replace the air cylinders on the Barber-Colman series 92 automatic air valve

The AV92 is designed for applications where the actuator must be removed from the valve to adjust or repair it

The AV-92 is available in three sizes to accommodate a wide range of condenser wire ropes

The actuator can only be installed and removed with a special tool

It can be used to replace the cam and plunger assembly (petrol pump vanes) in many Caterpillar machines, including: D8, D8T, D9, D9T, D10T, 3306B, 3800B and 3408B

Model AV-92 fits 3/16" (5 mm), 7/32" (5 mm) and 1/4" (6 mm) wire ropes

The AV-92 (Barber Colman) is used as a direct replacement for the Barber-Colman air cylinder when pneumatically operated valves are being replaced with electric valves

The AV-92 "Barber Colman" (Cam & Plunger) features a cast iron body: 1" NPT female inlet, 1" NPT female outlet, and has an operating pressure of 150 PSI at sea level

The AV-92 has a maximum delivery of 91 gpm and a maximum head of 232 ft

This valve may be used on systems with a maximum flow rate of 15 gpm and a static pressure of 50 PSI