SCHNEIDER ELECTRIC MP-5430 (Barber Colman) 120vDamperAct.S/R 2-15vdcStart

120vDamperAct.S/R 2-15vdcStart

Schneider Electric MP-5430 (Barber Colman) 120vDamperAct.S/R 2-15vdcStart

The Schneider Electric MP-5430 (Barber Colman) is a 120v DamperAct.S/R 2-15v dc start component that work as a heat controller.

The controls are easy to install. The 10 foot long power cord hosts 3 output wires which connect to the damper actuator. A 2-15vdc start signal is also available...

The MP5430 from Barber Colman is a 2-15V, 120Hz, 10 amperes PID control that can drive a direct-driven damper actuator. This PID controller is a perfect solution to match engine-cooling air for today's large engines (aircraft, trucks and ship). The MP5430 has two loop outputs each of 10 amps max.

The Schneider Electric MP-5430 (Barber Colman) Damper Actuator is a 120V AC actuator which receives power from a signal transformer. This Damper Actuator has an input voltage of 120VAC and an adjustable output between 0V and15VDC.

The MP5430 is a multi-purpose control for centrifugal fan, radiator, heater and pump applications. It can be used as a normally closed or normally open damper drive, or as a simple on/off control of a pump or motor depending upon the terminals used.

The Schneider Electric MP-5430 is a 120V, 1PH, 2 pole, 15Amps (VRMS) max trip actuated/inductive limit switch with a 180deg. swing and sealed shaft. This highly reliable limit switch is perfect for managing the heating circuits of conventional ovens, induction, and non-induction cooking chambers. The unit is designed with finger protection and has a 1" male tape terminal block for easy installation.