SCHNEIDER ELECTRIC 6658 (Barber Colman) MP-5213 24vVlvActuator 2-15vdc S/R

24V MODULATING ELECTRONIC VALVE ACT

The Schneider Electromechanical Valve Actuator MP-5213 series is a modulating actuator with a 24 V DC power supply.

The MP-5213 provides programmable, 24VDC modulating control for valve networks required for 21st century controls in the oil, gas and energy industries. Valve response rate is 100 times faster than that of conventional electro-mechanical or pneumatic valves. The MP-5213 can be used as a stand alone controller or integrated with machine control system to deliver a full range of remote/local control, adaptive predictive control capabilities in addition to advanced diagnostic capabilities. Programmability includes

The Schneider Electric 6658 (Barber-Colman MP-5213) 24 V LV Modulating Actuators use a digitally coded DC current to produce an output of up to 15 A (continuous duty) or 30 A (maximum intermittent duty). It utilizes a BLDC motor that can be coupled with a limit switch to control the maximum current and/or run time. An advanced bi-directional current sensing circuit improves the performance during high torque and low frequency input condition. An adjustable

6658 is an electronically controlled valve actuator designed to drive 200 to 400 amp, 24 volt Barber Colman Actuators (6 to 8 pole) with a rated current of 100 amps or less. It’s designed for use in horizontal servomotors that are typically equipped with a NEMA type 4X overcurrent protector.

The MP-5213 Modulating Valve Actuator provides a highly reliable means of controlling water flow to the process. The unit comes complete with pneumatic & electrical conduit, valve seat, Manifold mount, pressure gage and depth of stroke. 2-15VDC 4-20mA standard probe. UL508A Pneumatic Seal Press 10psi Actuator Pressure 120PSI Rated Voltage 24VDC Rated Current 4A / 15A @ 24VDC Roller Stro

At the heart of this module is a 24V DC electric motor. This motor drives a camshaft that controls two valves, one for supplying water and one for discharging it. The voltage can be set by a potentiometer from 2v to 15v and this adjustment determines the position of the cam relative to a microswitch.

The IE2 family of 2/2-way Modulating Valves offers new levels of efficiency for water, steam and air applications. These valves are exceptionally easy to install with their preconfigured cable harness in non-penetration mode or the optional plug-in connectors in direct termination mode. SELECT IE2 MODULATING VALVES . FEATURES : The IE2 family offers a number of key benefits that result from our continuous drive to provide products that meet every need: AUTOMAT