ERIE AG13A02A ACTUATOR 24 VOLT 18 IN. LEADS | Two-Way and Three-Way Zone Valves Designed For

24V On/Off 2 POSITION SPRING RETURN

Erie Valves offers an extensive selection of valves that provide value engineered and proven performance in a wide range of applications. Standard offerings contain conventional threaded actuators and stem-actuated globe, butterfly, check ball, and plug valves. In addition to these standard styles our One-Step catalog offers the widest variety of actuators available for use with all types of valves. Our valve actuator product line consists of 24V On/Off 2 Position Spring Return, 12V On/Off 2 Position Spring Return, and 5V Universal Flow Control Actuators (available in 12V DC, 110V AC, 220V AC

The Erie Zone Valve features a seal cap and a low profile actuator for easy access to solenoid. Wire leads are 18 in. long, spring return actuator. Comes with mounting hardware and instructions. 24 Volt DC. Actuator 2 Position Spring Return. Water pressure 1 psi minimum must be maintained during cycling pressure. Fittings are 3/4 in. O.D. x 1/2 in NPSM thread with 1/16 in. NPT slip type fittings or 3/4 in NPT straight thread ends on the valve body connection to the supply line

An adjustable 2-way or 3-way zone valve, the AG13A02A accommodates all kinds of HVAC and building applications. 24 Volts, Spring Return. Features: Two-Way or Three Way Zone Valves This product is designed for use with 18 In. leads Relay contacts rated to Normally Closed (NC) and Normally Open (NO) Functions as a follower in the same zone or as an independent zone in another zone Outlet for heating coil MUST be located below supply outlet +/- 5% variation in flow rate required @ 100% of maximum test flow rate

The Erie ERIE AG13A02A HVAC Zone Valve is a Two-Way AdJUSTABLE PRESSURE/FLOW ZONE VALVE. The Valve operates on 24 Volt Direct Current (VDC) applications. It is a 24V Class 2 actuator with spring-return to the off position upon release of the actuator handle. The function of this valve is an AdJUSTABLE PRESSURE/FLOW ZONE VALVE that combines both the pressure and flow functions in one compact body. This valve requires two-wire connection with a supply voltage requirement of 24 Volts D.C.

Erie 24 volt actuator controls on/off, normally open and normally closed 2 position zone valves. Compatible with carrier compatible gas furnaces manufactured from 2003 to 2009. Not for use with carrier compatible electronic ignition furnaces manufactured from 2005 to 2013.

Erie AG13A02A is a two-way or three-way zone valve designed for use on Trane, American Standard or Bryant heating & cooling equipment. This product is 24 volt and 18 inch lead installed with molded in ground screw terminal. Comes complete with actuator, 2 PVC insulated zone valves and strain relief guards.

The Erie SmartZone Valve is a "tamper-resistant" water control valve that can be used in an "On/Off" or "Two-Position" operation. The valve body and actuator are made of brass. This valve will be for use with hot water (120 degree maximum) only. Recommended installation temperature range is 40 degree Fahrenheit to 100 degree Fahrenheit. Meets ASME A112.1 (2006) and UL Standard 984 CAN/ULC S306 (2010) code requirements and is intended for use in fire sprinkler systems."