SCHNEIDER ELECTRIC 8910DPA42V09 -Square D 208/240v 40a 2p DP Contactor

208/240v 40a 2p DP Contactor

SCHNEIDER ELECTRIC 8910DPA42V09 -Square D 208/240v 40a 2p DP Contactor Info

Schneider Electric 8910DPA42V09 -Square D 208/240v 40a 2p DP Contactor

This DP Contactor is a 120/240V - Two Pole - Double Throw (DP) - Class 1 double-break contactor with a 2 amp current carrying capacity and an AC coil voltage of 208-240v. It features miniature size requiring only 21/4 in. x 21/4 in. of mounting space, and a low amperage draw of .06 amps at 208v and .08 amps at 240v AC supply voltage. The MTBF (Mean Time Between Failures) is 150,000 hours.

Schneider Electric 8910DPA42V09 -Square D Contactor, DP (Double Pole) Series Contacts, 4000A (480v), 40a, 600v 20kA Tg Open Curves, C-Face, Aux Contacts Normally Closed for Circuit Breaker Applications.

This Square D DP-H 208/240 volt 40 amp double pole air cooled disconnect switch provides a means of disconnecting power from two 277/480 volt air cooled lighting ballasts in one location. The maximum thermal current is rated at the nameplate for a 10 second trip demand. The DP-H features front load terminals, solder lug termination method and an aluminum disconnect switch case.

The Square D 8910 DP Contactor is for use on Cam A phase of common contacts and a combination of frame and branch contacts up to 300A. The DP contactor series are designed for remote motor control, DC motor control, manual start with auxiliary switch, and battery backup applications. These DPA DP contactors come as single units or constructed in line with other accessories for installation convenience.

SCHNEIDER ELECTRIC Square D DP Contacts are designed to properly protect, control, and select motor, lighting, and related loads from a variety of power sources. The Square D line has become the industry standard for over 30 years because of its high reliability, superior performance and long life in all types of service conditions. Included within the product line are DP-A 2 pole Contacts; General Purpose trip type, DP-R Special Purpose with Residual-current device (RCD), or resettable circuit breakers (RCB) as required by current codes; Special Purpose type with line breaker or