SCHNEIDER ELECTRIC 9013FSG2J24M4 Square D by Air-Pump Pressure Switch, NEMA 1, 40-60 psi Pressure Setting, 20-65 psi Cut-Out, 15-30 psi Adjustable Differential, Low-Pressure Cut-Off

WaterPump#Sw40-60#Diff DPST

The 25-30DPST (Low-Pressure Cut-Off) Pressure Switch is designed for water pumps. The Pressure Switch is a DPST single switch with settings of 40-60, 20-65 and Low-Pressure Cut-Out of 15-30. It has a 1/2" MPT inlet and outlet (this will fit all brands of submersible pumps). The two pressure settings allow for operation down to a 2" static level and the low pressure drop cut

Schneider Electric 9013FSG2J24M4 Square D by Air-Pump Pressure Switch, NEMA 1, 40-60 psi Pressure Setting, 20-65 psi Cut-Out, 15-30 psi Adjustable Differential, Low-Pressure Cut-Off

The APF Single Stage Water Pump Switch is designed for a variety of applications on residential and commercial installations. Operating pressure ranges from 40 to 60 psi (276-414 kPa). The metal body is galvanized steel for chemical resistance. The pre-actuated porcelain-metal diaphragm actuates pressure switch contacts at a set differential. Air pressure in the Pressure Setting connection port is utilized to trip the internal microswitch and open the electrical contacts. The Pressure Switch can be mounted directly

The Schneider Square D by Air-Pump Pressure Switch is designed for use with air-operated air compressors. A pressure setting control allows the switch to be set at any point between 20 and 60 psi with a differential pressure of 15 to 30 psi. Two different pressure ranges are available, 40 to 60 psi or 70 to 100 psi. The switch features a rotary on/off handle, an indicator light, and a power indicator lamp.

Schneider’s Square D by American Electric Company 2250A Series Diverter Pressure Switch controls the diverter valve process. It is for use with water systems such as dishwashers and washing machines where a three-way diverter is used to direct the flow of water between the product, a drain, and an auxiliary water source. The pressure switch is preset at the factory for use with a 40 to 60 psi maximum pressure system.

The 9013FSG2J24M4 Square D by Air-Pump Pressure Switch is rated for continuous duty operation and features adjustable differential, low-pressure cut-off, NEMA 1 enclosure and multiple pressure settings. Ideal for a variety of water pump set-ups where alarm and shutdown are required, the Square D by Schneider Electric 9013FSG2J24M4 square d by air-pump pressure switch comes with a low pressure cut-off to protect pumps from burn

The Square D by Schneider Electric 9013FSG2J24M4 Water Pump Switch is used where the accumulation of air and/or aerosols in gaseous service is likely to occur. A magnetic-operated pilot with internal manual reset is standard; externally operable solenoid pilot models are also available. Auxiliary contacts are provided with sensing relays to detect pump motor or discharge heater faults and alarm conditions. 5/8" studs for pressure port.