SCHNEIDER ELECTRIC 9013GHG2J25 Square D by Pressure Switch, 200/250 psi Sensor, NEMA 1 Enclosure, 1/4" NPSF, 0-10 Bar Points

40/200# DPDT 10A Sw

The Schneider Electric 9013GHG2J25 Square D by Pressure Switch, 200/250 psi Sensor, NEMA 1 Enclosure, 1/4" NPSF, 0-10 Bar Points - 40/200# DPDT 10A Switch is a Pressure switch. It's for use with motor protection relay modules in combination with a motor starter.

Schneider Electric's 9013GHG2J25 is a two-piece, 200/250 psi pressure switch with two NEMA 1 enclosures. The switch has a 10-bar points for all types of applications and it is equipped with a threaded pipe plug that allows for quick and easy wiring. It features a 40/200# DPDT 10A switch that can be used in many different atmospheric conditions when combined with the standard nameplate ratings.

The ACQ100 is a 200 psi/250 psi NAMUR pneumatic actuator (aka pressure switch). The switch is rated for A2 pressure with medium carbon steel body. Contact ratings are 40 - 200 #@72 & 0-10bar points, .200"/0.508mm pkg., factory set. The ACQ100 is shipped in an enclosed NEMA 1 style steel enclosure. The operator switch is located on the top cover and requires a point to change functions

All of these pressure switches are high and low pressure switches. Most are with 5/8" or 3/4" quick connect outlet. Suitable for use in dry environments; conform to NEMA 1 Standards.

This pressure switch is a UL type I enclosure that has zero leakage and gives maximum protection to the circuit by opening with rising pressure. This unit features removable low-restriction filter, spring-loaded actuator, snap-action electrical connections, built-in wire strain relief, and 1/4" NPSF threads. It is 0-10 bar points switch with a 20mA output signal.

The 9013GHG2J25 can be used for controlling the following types of automation equipment: Fans, Air terminals, Compressors- including pump overload protection, Models with up to two independent temperature compensating sensors and features 1.0% accuracy (up to 0.0 to 60.0% RH) Volatile Organic Compound (VOC) sensor is optional Sensor is standard NEMA 1 stainless steel -40F to 125F (-40C to +52C) operating range

The Schneider Electric 9013GHG2J25 Square D pressure switch with a 200-250 PSI sensor, 1/4 NPSF male inlet and 2-1/2" square D size enclosure will satisfy even the most discerning of users. The spring actuated SPDT toggle switch is rated up to 10A, 250VAC, for use on size E or J pressure switches. This pressure switch is protected against over current and over voltage, as well as short circuit.