Schneider Electric B3.70 Overlaod Relay

Overlaod Relay

It is housed in a plastic enclosure with screw terminals

It has thermal magnetic self-resetting mechanism and maximum load of 32A

The Schneider Electric B3

The relay has a rated current of 32-63 A at 230 VAC and a rating voltage of 600 VAC

The B3

It is used to disconnect the load from the source in case of overloading

70 Overload Relay provides protection against short circuit, overload, and earth fault conditions in AC circuits up to 240Vac

This Schneider Electric Overload Relay is a protective device for household and industrial appliances

70 Overlaod Relay is an ideal solution in controlling the connected load and preventing overloading of the supply voltage

Designed to meet various overload needs, it is an ideal solution for high voltage and current applications

xx series are designed to provide current limiting when used with inductive loads such as motors and transformers, while reducing the risk of tripping due to intermittencies (1)

70 Overload Relay

70 Overlaod Relay is a 1 phase 3 pole, 15A rated, 250V coil relay for switching loads up to 15A in resistive or resistive/inductive applications

70 Overload Relay, you can protect your sensitive electronic equipment from being damaged by overloading

The relay can be wired to other protective devices for reliable electrical system operation, safeguarding equipment, personnel and surrounding areas from potential hazards

70 Overload Relay is a manual single phase overload relay with voltage rating of 230/400 VAC

Overload relays provide protection against overloads as well as short-circuits, which can occur between phases or within a phase

It protects circuits from damage caused by overloads, and provides safe tripping of the connected devices

With Schneider Electric B3

This Schneider Electric B3

B3

It is a solid state relay designed for use as a part of equipment protection networks against power overloads and short circuit currents

This is achieved by sensing the maximum current that can pass through the relay coil before reaching its saturation point

70 Overlaod Relay is a load disconnecting relay for use on circuits with high inrush currents, such as motors and inductive lighting

With overload protection, you can ensure the safe operation of electrical equipment that may be exposed to changing load conditions in industrial or commercial settings

70 Overlod Relay is a self-contained, solid state relay that, mounted on a DIN rail, provides automatic switching of load currents in two or three-phase systems

The product is made of plastic, has terminal screw terminals and its dimensions are 225 x 112 x 100 mm

Schneider Electric B3