Johnson Controls 56319 Armored Capillary W/One 1/4 SAE Fem Flr Connector Straight & One 90 Fitting

ARMORED CAPILLARY 24" 1 STRAIGHT AN

The Armored Capillary has a toughened 1/4" NPT brass female threaded inlet and a straight 1/4" NPT male fitting connector. It is made from stainless steel with a 1/4" NPT inner bore and an outer Diameter of 3". It is recommended that this product be used with a shield or limiting device for connection into armrests, under dash assemblies or other similar applications where flow must be restricted to prevent over-run.

The 33mm Armored Capillary has thousands of uses in HVAC and Building Automation for limited space situations. The fully molded, impact resistant polyethylene sheathed cable attaches quickly to the terminal block with two opposing screws making component or cable removal virtually impossible. The Armored Capillary armored cable is the perfect choice for controlling supply air temperature, airflow direction, maintaining duct pressure relationships, measuring airflow and detecting air leaks.

The Johnson Controls 56319 Armored Capillary is an armored capillary with straight pipe. It has a 1/4 SAE female fitting, and one 1/4 inch straight connector (fitting). It is manufactured in United States.

Armored capillary with one 1/4 SAE female connection straight connector and one 90 fitting.

Johnson Controls 56319 Armored Capillary W/One 1/4 SAE Fem Flr Connector Straight & One 90 Fitting is ideal for applications where water flows through the capillary. The armored construction of this capillary helps reduce the risk of damage to the sensing element when exposed to debris or other contaminants. This capillary's armored construction also helps protect components from thermal shock.

The Johnson Controls 56319 Armored Capillary W/One 1/4 SAE Fem Flr Connector Straight & One 90 Fitting is designed for use as a heating and cooling component in residential and commercial units. The armored capillary encompasses a copper tube wrapped with several layers of fiberglass insulation.

Street sweepers use this armored capillary distributes propane, fuel oil, or diesel fuel to stationary equipment safely and efficiently. It has a straight fitting on one end and an 90 degree fitting on the other end.

The ArmorPipe AC1FE Series is specifically designed with the armored cable & conduit installer in mind. The AC1FE capillary has a built in tape sealer on one end to protect against water entry and each coil is lacquered to prevent rusting.

This armored capillary delivers galvanic isolation, safety, long life in all low voltage systems, i.e., communications, energy mgt., security & life support. Exempt from RoHS Directive 2002/95/EC.

Johnson Controls armored capillary cable is for transferring water and oil, and is Self-retracting cable retracts without breaking or tangling, Tough armor provides maximum protection against cuts, impact damage, abrasion, sunlight exposure, chemicals, oils and fuels. Made of polyurethane coated fiberglass yarns with aluminum helixes.

The capillary line can be used for a wide range of fluid transport applications. It is especially useful when operating pressures are above 20 psi and when resistance to kinking is a major concern. Made from polyethylene, this capillary line is highly resistant to most fluids, yet it has a very low pressure drop at all flow rates. These qualities make it an excellent choice for a high volume, low pressure application such as a windshield washer bypass hose.

This capillary can be used in automotive cooling (GM (Cap) Motors), heating (A-30T, A-40T, A-50T, AL-200 & AL250), and power steering (A-120), applications where air entrance is