Setra 2061100PG2M11028NN "0-100# 4-20ma 1/4""NPTmaleTrans"

"0-100# 4-20ma 1/4""NPTmaleTrans"

This Baratron 0-100# 4-20 mA analog output/input transducer with 1/4"" NPT male threads with a PVC isolation and a 2" diameter measuring tip is covered by Setra Service Program for 5 years from date of purchase.

1/4""NPTmaleTransducer, 2.0VPP (Maximum Power), 4-20MA"

Industrial grade 0-100 PSI pressure transmitter with built-in 4-20 mA output signal, NPT threaded male inlet and NPT threaded male outlet for 1/4"" O.D. tubing, 6"" long leads with double wire seal connectors

The PG2M 11028 is the ideal transmitter for HART® and Modbus® slaves, thanks to its serial interface. The serial 0-100 lb-in (4-20 ma) output signal provides a convenient way to integrate a peripheral device into a control loop. The compact housing makes it easy to install the transmitter in a cramped area.

The 2061100PG2M11028NN Panel-Mounting Transmitter from Setra is designed to transmit load cell output as 4-20 mA. The bulkhead transmitter is equipped with a BNC male connector. It includes a built-in galvanic isolator and filter circuits to create a noise free signal that can be transmitted long distances without signal degradation. It has an input range of 0 to 100 lbf/ft and a transmission range of 30 ft (9.1m). The panel-mounting transmitter is well suited for many industrial and medical applications that require weight measurement with a remote or local display

The Settle RT M Series allows you to connect and communicate with your RT controller over a non-isolated 4-20mA loop. With the T&D Closed Loop Non-Isolated Transmitters, your RT system can now monitor any process that uses a 4-20mA loop (such as a tank or valve level), even if there is no power going to that system. It also enables you to use the full functionality of all control functions over that loop, including PID, Sequencing, Logging and more.

The Setra PG2M is a 4-20 mA process gauge that has been optimized for use with any of the existing Setra 4-20 mA transmitter ranges. The PG2M offers three key innovations that make it extremely user friendly: The pointer can be removed and reattached with a single screw, a built in mounting foot provides a flush mounting surface when used with the plastic wall plate, and the high contrast, black background allows for easier readability in front of black or dark backgrounds.