SIEMENS 3RT2036-1AC20 Industrial Controls 24V 50AMP 3-POLE CONTACTOR

24V 50AMP 3-POLE CONTACTOR

3RT2036-1AC20 24V 50AMP 3-POLE CONTACTOR

This 24V 50 Amp 3 Pole Contactor is manufactured by Siemens as part of the 3RT product line. It is fully adjustable and can be used for selection of coil current, fuse overload protection, and safe interruption of an inductive load. The 3RTF100B1003 breaker type contactor uses a single coil with heavy duty insulation and 200 amps operating capacity between coil and trip make this contactor ideal for high load industrial use.

The Siemens 3RT2036-1AC20 is a 24 volt, 50 amp, 3-Pole Contactor with short circuit proof contacts (N/O) (N/C). With a thermal overload protection (T) for extra safety, the contactor features a sohuld-strength handle. This contactor is for use on a 1[A] rated system at 115 VAC with an intermittent duty cycle and continuous duty.

The F09D206H1401 is a three-pole, two-coil 24V DC contactor for general purpose controls and normally closed contact control. The 3RT2036-1AC20 uses trip free circuit breaking, has a compact design, includes electronic components on the coils.

THREE PHASE, THREE WIRES, 50 AMPERE CONTACTOR

The 3RT2036-1AC20 is a 2-pole AC contactor for industrial applications. Its rated current ranges from 5 to 25 amperes and can handle a power of 0.75 kW per pole. The current of both the c- and d- terminals can be broken with an interposed switch, as well as by the contactor pushbutton. The contactor has a short-circuit breaking capacity of up to 1.5 kA, which is higher than that of the majority of products in this category.

Siemens Standard Duty Contactors are a compact, low profile three-pole contactors with a wide range of uses.